Модули защиты от перенапряжения
Phoenix Contact PT-IQ-4X1+F-24DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for four signal wires with common reference potential. Indirect grounding via gas-filled surge arrester.
100 716.00
Phoenix Contact PT-IQ-5-HF+F-12DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for five signal wires. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).
100 716.00
Phoenix Contact PT-IQ-5-HF+F-5DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for five signal wires. For HF applications and telecommunications interfaces without supply voltage (up to 90 Mbps).
100 716.00
Phoenix Contact PT-IQ-PTB-BE-UT Base element for the PLUGTRAB PT-IQ-PTB... supply and remote signaling module
31 596.00
Phoenix Contact PT-IQ-PTB-PT Module for power supply and multi-stage - floating remote signaling of connected surge protection modules.
67 341.00
Phoenix Contact PT PE/S+1X2-24-ST Protective plug PT with surge voltage equipment protection for power supply units - visual error display - nominal voltage: 24 V and a 2-core floating signal circuit - nominal voltage: 24 V.
102 204.00
Phoenix Contact PT PE/S+1X2-BE Base element for protective plug PT with surge voltage device protection for the power supply unit and one 2-wire floating signal circuit - mounting on NS 35/7.5 and NS 35/15 - housing width: 17.5 mm
36 531.00
Phoenix Contact SFP 1-15/120AC/EX Device protection, according to type 3/class III, with network interference suppression filter to prevent high-frequency interference voltages, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indicatio
121 998.00
Phoenix Contact SFP 1-20/230AC Device protection - according to type 3/class III - with network interference suppression filter to prevent high-frequency interference voltages - for 1-phase power supply networks with separate N and PE (3-conductor system: L1 - N - PE) - with remote ind
116 934.00
Phoenix Contact S-PT-2XEX-24DC Surge protection for two floating signal circuits in screw-on module with IP67 protection for sensor heads - connection M20 x 1.5. Tested in acc. with the protection types in Ex areas Ex d / Ex tD / Ex ia IIC / Ex iaD. Can be used inside of a fieldbus-sys
67 044.00
Phoenix Contact S-PT-2XEX-24DC-1/2 Surge Suppressors 10KA 24VDC Cable Mount
67 044.00
Phoenix Contact S-PT-2XEX-48DC Surge protection for two floating signal circuits in screw-on module with IP67 protection for sensor heads - connection M20 x 1.5. Tested in acc. with the protection types in Ex areas Ex d / Ex tD / Ex ia IIC / Ex iaD. Can be used inside of a fieldbus-sys
67 044.00
Phoenix Contact S-PT-2XEX-48DC-1/2 Surge Suppressors 10KA 48VDC Cable Mount
67 044.00
Phoenix Contact S-PT-EX-24DC Surge protection for one floating signal circuit in screw-on module with IP67 degree of protection for sensor heads - connection: M20 x 1.5. Tested in accordance with types of protection in Ex areas Ex d / Ex tD / Ex ia IIC / Ex iaD. Suitable for use in t
45 417.00
Phoenix Contact S-PT-EX-24DC-1/2 Surge Suppressors 10KA 24VDC Cable Mount
43 176.00
Phoenix Contact S-PT-EX-48DC Surge protection for one floating signal circuits in screw-on module with IP67 protection for sensor heads - connection M20 x 1.5. Tested in acc. with the protection types in Ex areas Ex d / Ex tD / Ex ia IIC / Ex iaD. Can be used inside of a fieldbus-sys
45 417.00
Phoenix Contact S-PT-EX-48DC-1/2 Surge Suppressors 10KA 48VDC
45 417.00
Phoenix Contact S-PT-EX(I)-24DC Surge protection in the IP67 screw-on module for measuring sensors in intrinsically safe circuits - direct mounting with M20 x 1.5 outer thread - cable gland for the signal cable - two-stage protective circuit. HART-compatible.
76 875.00
Phoenix Contact S-PT-EX(I)-24DC-3/4 Surge Suppressors 10KA 24VDC Cable Mount
76 875.00
Phoenix Contact SYS N4 120/240S Indoor/outdoor lightning current arrester and TVSS system for 120/240 single/split phase
9.00
Phoenix Contact SYS N4 480D Combination lightning current arrester and TVSS system for ungrounded 480 V Delta systems
12.00
Phoenix Contact SYS N4/I 120/240S Indoor/outdoor lightning current arrester and TVSS system for 120/240 single/split phase
9.00
Phoenix Contact SYS N4/I 277/480Y Indoor/outdoor lightning current arrester and TVSS system for 277/480 V Wye system
12.00
Phoenix Contact SYS N4/I 480D Combination lightning current arrester and TVSS system for ungrounded 480 V Delta systems
12.00
Phoenix Contact SYS N4X 120/208Y Indoor/outdoor lightning current arrester and TVSS system for 120/208-240 V
12.00
Phoenix Contact SYS N4X 120/240HLD Indoor/outdoor lightning current arrester and TVSS system for 120/208-240 V
15.00
Phoenix Contact SYS N4X 277/480Y Indoor/outdoor lightning current arrester and TVSS system for 277/480 V Wye system
12.00
Phoenix Contact SYS N4X 480D Combination lightning current arrester and TVSS system for ungrounded 480 V Delta systems
15.00
Phoenix Contact SYS N4X/I 120/208Y Indoor/outdoor lightning current arrester and TVSS system for 120/208-240 V
15.00
Phoenix Contact SYS N4X/I 120/240HLD Indoor/outdoor lightning current arrester and TVSS system for 240 V High-Leg Delta
15.00
Phoenix Contact SYS N4X/I 277/480Y Indoor/outdoor lightning current arrester and TVSS system for 277/480 V Wye system
15.00
Phoenix Contact SYS N4X/I 480D Combination lightning current arrester and TVSS system for ungrounded 480 V Delta systems
15.00
Phoenix Contact SYS-N4XP FLT-CP 240D Indoor/outdoor lightning arrester and TVSS system for 277/480 V Wye system
6.00
Phoenix Contact SYS-SET FLT-CP 240/415Y Surge Suppressors Wall Mount Plug-In
3.00
Phoenix Contact SYS-SET FLT-CP 240S Surge Suppressors Wall Mount Plug-In
3.00
Phoenix Contact TTC-3-2X1-24DC-PT Surge protection for two signal wires with common reference potential - e.g. - Digital IN/OUT.
41 466.00
Phoenix Contact TTC-6-1X2-24DC-UT Surge protection for a 2-wire floating signal circuit - e.g. - 0(4) ... 20 mA current loop - HART-compatible.
34 425.00
Phoenix Contact TTC-6-1X2-M-24DC-UT-I Surge protection with integrated status indicator and knife disconnection for a 2-wire floating signal circuit - e. g. 0(4)...20 mA current loop - HART-compatible.
40 809.00
Phoenix Contact TTC-6-1X2-M-EX-24DC-UT-I Surge protection with integrated status indicator and disconnect knife for a 2-wire floating Ex i signal circuit - e.g. - 0(4) ... 20 mA current loop - HART-compatible.
44 100.00
Phoenix Contact TTC-6-2X1-24DC-PT Surge protection for two signal wires with common reference potential - e.g. - Digital IN/OUT.
37 518.00
Phoenix Contact TTC-6-2X1-M-24DC-PT-I Surge protection with integrated status indicator and disconnect knife for two signal wires with common reference potential - e.g. - Digital IN/OUT.
40 809.00
Phoenix Contact TTC-6-3-HF-F-M-EX-24DC-UT- Surge protection device
45 291.00
Phoenix Contact TTC-6P-2-HC-24DC-PT-I Surge protection - consisting of protective plug and base element - with integrated status indicator for a 2-wire floating signal circuit with high nominal current.
49 164.00
Phoenix Contact TTC-6P-2X1-12DC-UT-I Surge protection - consisting of protective plug and base element - with integrated status indicator for two signal wires with common reference potential - e.g. - Digital IN/OUT.
47 676.00
Phoenix Contact TTC-6P-2X1-24DC-PT-I Surge protection - consisting of protective plug and base element - with integrated status indicator for two signal wires with common reference potential - e.g. - Digital IN/OUT.
47 676.00
Phoenix Contact TTC-6-TVSD-C-24DC-PT-I Fine surge protection with integrated status indicator for a signal wire with grounded reference potential.
8 124.00
Phoenix Contact TTC-6-TVSD-C-24DC-UT-I Fine surge protection with integrated status indicator for a signal wire with grounded reference potential.
8 124.00
Phoenix Contact TTC-6-TVSD-C-48DC-UT-I Fine surge protection with integrated status indicator for a signal wire with grounded reference potential.
8 124.00
Phoenix Contact TTC-6-TVSD-D-24DC-UT-I Fine surge protection with integrated status indicator for a 2-wire floating signal circuit.
7 602.00
Phoenix Contact TT-UKK5-T-BE TERMITRAB base element with universal foot, with screw connections on both sides.
7 299.00
Phoenix Contact VAL-CP-1S-175 Plug-in surge arrester for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.
81 705.00
Phoenix Contact VAL-CP-1S-350 Plug-in surge arrester for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.
75 723.00
Phoenix Contact VAL-CP-1S-350/O Plug-in type 2 arrester (surge arrester) for single-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE).
73 407.00
Phoenix Contact VAL-CP-2C-175 Plug-in surge arrester for 2-phase power supply networks with N and PE in a common conductor (3-conductor system: L1, L2, PEN), with remote indication contact.
74 202.00
Phoenix Contact VAL-CP-350-ST Replacement plug for VAL-CP surge arrester with high-capacity varistor free of leakage current.
39 324.00
Phoenix Contact VAL-CP-3S-175 Plug-in surge arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with remote indication contact.
134 175.00
Phoenix Contact VAL-CP-3S-350 Plug-in surge arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE), with remote indication contact.
143 802.00
Phoenix Contact VAL-CP-N/PE-175-ST Replacement plug for VAL-CP surge arrester with N-PE spark gap.
42 840.00
Phoenix Contact VAL-MS 1000DC-PV-ST Replacement plug for PV arrester combinations from the VAL-MS 1000DC-PV-... product range
31 650.00
Phoenix Contact VAL-MS/1+1-BE Base element for type 2 arresters of the VALVETRAB MS product range. Version for 1-phase power supply with separate installation of N and PE conductors.
22 134.00
Phoenix Contact VAL-MS 120 ST Surge protection connector type 2 with high-capacity varistor for VAL-MS base element - thermal monitoring - visual fault warning. Design: 120 V AC
31 650.00
Phoenix Contact VAL-MS 230 Surge voltage arrester consisting of base element and ground connector with high-capacity varistor - for mounting on NS 35/7.5 - nominal voltage: 230 V AC - 1-channel.
38 685.00
Phoenix Contact VAL-MS 230/2+0 2-pos. rail-mountable surge arrester for 2+0 circuit - thermal/dynamic monitoring and visual fault indicator.Arrester rated voltage: 275 V AC.
63 969.00
Phoenix Contact VAL-MS 230/3+1 Surge arrester consisting of base element and ground connectors - for mounting on NS 35/7.5 - nominal voltage: 230 V AC - 3 + 1 circuit
131 484.00
Phoenix Contact VAL-MS 230/3+1 FM Surge voltage arrester consisting of base element with remote indicator contact and ground connectors - for mounting on NS 35/7.5 - nominal voltage: 230 V AC - 3 + 1 circuit
142 800.00
Phoenix Contact VAL-MS 230/FM Surge voltage arrester consisting of base element with remote indicator contact and ground connector with high-capacity varistor - for mounting on NS 35/7.5 - nominal voltage: 230 V AC - 1-channel
42 201.00
Phoenix Contact VAL-MS 230 ST Surge protection connector type 2 with high-capacity varistor for VAL-MS base element - thermal monitoring - visual fault warning. Design: 230 V AC
31 650.00
Phoenix Contact VAL-MS 320/1+1-FM Surge arrester for 3-conductor power supply systems (L1 - N - PE) - consisting of a base element with remote indication contact and protective connectors - for mounting on NS 35.
74 970.00
Phoenix Contact VAL-MS 320/3+0 Surge arrester for 4-conductor power supply systems (L1 - L2 - L3 - PEN) - consisting of a base element and protective connectors - for mounting on NS 35.
99 420.00
Phoenix Contact VAL-MS 320/3+0-FM Surge arrester for 4-conductor power supply systems (L1 - L2 - L3 - PEN) - consisting of a base element with remote indication contact and protective connectors - for mounting on NS 35.
107 775.00
Phoenix Contact VAL-MS 320/3+1 Surge voltage arrester combination 4-channel (in the 3+1 circuit) - for mounting on NS 35/7.5 - voltage 230 V AC
131 484.00
Phoenix Contact VAL-MS 320/3+1/FM-UD Surge voltage arrester consisting of base element with remote indicator contact and ground connectors - for mounting on NS 35/7.5 - nominal voltage: 320 V AC - 3 + 1 circuit
142 800.00
Phoenix Contact VAL-MS 320 ST Surge protection connector type 2 with high-capacity varistor for VAL-MS base element - thermal monitoring - visual fault warning. Design: 320 V AC
30 114.00
Phoenix Contact VAL-MS 320-UD ST Surge protection connector type 2 with high-capacity varistor for VAL-MS base element - thermal monitoring - visual fault warning. Design: 320 V AC
31 650.00
Phoenix Contact VAL-MS 350VF Surge voltage arrester consisting of base element with protective plug with a connection in series with a varistor and a gas-filled spark gap - for mounting on NS 35/7.5 - nominal voltage: 230 V AC - 1-channel
43 158.00
Phoenix Contact VAL-MS 350 VF ST surge protection connector type 2 with series connection consisting of varistor and gas-filled spark gap for VAL-MS base element - thermal monitoring - visual fault warning. Design: 350 V AC
36 126.00
Phoenix Contact VAL-MS 400 ST Surge protection connector type 2 with high-capacity varistor for VAL-MS base element - thermal monitoring - visual fault warning. Design: 400 V AC
31 947.00
Phoenix Contact VAL-MS 500 ST Surge protection connector type 2 with high-capacity varistor for VAL-MS base element - thermal monitoring - visual fault warning. Design: 500 V AC
31 410.00
Phoenix Contact VAL-MS 580/3+0 Surge arrester for 4-conductor power supply systems (L1 - L2 - L3 - PEN) - consisting of a base element and protective connectors - for mounting on NS 35.
101 766.00
Phoenix Contact VAL-MS 60 Surge arresters consisting of base element and protective connector with high-capacity varistor - for mounting on NS 35/7.5 - 1-channel
36 768.00
Phoenix Contact VAL-MS 60/FM Surge arrester consisting of base element with remote indicator contact and protective connector with high-capacity varistor - for mounting on NS 35/7.5 - 1-channel
40 281.00
Phoenix Contact VAL-MS 60 ST Surge protection plug type 2 with high-capacity varistor for VAL-MS base element - thermal monitoring - visual fault warning. Design: 60 V AC
31 968.00
Phoenix Contact VAL-MS 75 VF ST Surge protection plug type 2 with series connection consisting of varistor and gas-filled spark gap for VAL-MS base element - thermal monitoring - visual fault warning.
36 126.00
Phoenix Contact VAL-MS 800/30 VF/FM Surge arrester consisting of 2-channel base element with remote indication contact and protective plugs connected in series with a varistor and a gas-filled spark gap.
83 943.00
Phoenix Contact VAL-MS-AR 350 VF The VAL-MS-AR 350 VF is a hybrid SPD with a gas discharge tube in series with a metal oxide varistor and thermal monitor - ideal for applications where no leakage current can be tolerated.The VAL-MS BE-AR base provides a disconnect that separates the fiel
41 883.00
Phoenix Contact VAL-MS-AR 350 VF/FM The VAL-MS-AR 350 VF/FM is a hybrid SPD with a gas discharge tube in series with a metal oxide varistor and thermal monitor - ideal for applications where no leakage current can be tolerated.The VAL-MS BE-AR/FM base provides a disconnect that separates th
42 840.00
Phoenix Contact VAL-MS-AR 75 VF The VAL-MS-AR 75 VF is a hybrid SPD with a gas discharge tube in series with a metal oxide varistor and thermal monitor - ideal for applications where no leakage current can be tolerated.The VAL-MS BE-AR base provides a disconnect that separates the field
41 883.00
Phoenix Contact VAL-MS-AR 75 VF/FM The VAL-MS-AR 75 VF/FM is a hybrid SPD with a gas discharge tube in series with a metal oxide varistor and thermal monitor - ideal for applications where no leakage current can be tolerated.The VAL-MS BE-AR/FM base provides a disconnect that separates the
42 840.00
Phoenix Contact VAL-MS-AR-T1/T2 75 The VAL-MS-AR T1/T2 75 is a high-capacity SPD for Type 1 lightning as well as Type 2 switching surge currents - ideal for applications with both high load currents and high surge risk.VAL-MS BE-AR base provides a disconnect that separates the field wire f
50 655.00
Phoenix Contact VAL-MS-AR-T1/T2 75/FM The VAL-MS-AR T1/T2 75/FM is a high-capacity SPD for Type 1 lightning as well as Type 2 switching surge currents - ideal for applications with high load currents and high surge risk.The VAL-MS BE-AR/FM base provides a disconnect that separates the field w
55 575.00
Phoenix Contact VAL-MS BE-AR Base element for Type 1 and Type 2 surge arresters of the VAL-MS series - with separate field and house termination - tool-free isolation disconnect - and test point. Design: 1-channel - bridgeable.
20 706.00
Phoenix Contact VAL-MS BE-AR/FM Base element for Type 1 and Type 2 surge arresters of the VAL-MS series - with separate field and house termination - tool-free isolation disconnect - test point - and remote indication contacts. Design: 1-channel - bridgeable.
23 979.00
Phoenix Contact VAL-MS BE/FM Base element for type 2 arresters of the VALVETRAB MS series of products - with remote indication contact. Design: 1-channel
16 065.00
Phoenix Contact VAL-MS-T1/T2 175/12.5 ST L-N replacement plug for VAL-MS-T1/T2 175/12.5 plug-in lighting/surge arrester.
46 767.00
Phoenix Contact VAL-MS-T1/T2 335/12.5/1+1 Universal varistor-based plug-in lightning/surge arrester for 1-phase power supply networks with separate N and PE (3-conductor system: L1 - N - PE).
93 786.00
Phoenix Contact VAL-MS-T1/T2 335/12.5/3+0- Surge Suppressors Lightning 50Hz/60Hz 240VAC/415VAC
136 065.00
Категории
Agency Approvals
Attenuation
Body Material
Body Orientation
Body Plating
Cable Length
Cable Type
Capacitance Value
Category
Clamping Voltage
Color
Connector Type A
Connector Type B
Connector Type
Construction
Contact Material
Contact Plating
Contact Termination
COO
Density
Dielectric
Dimension
ECCN
Efficiency
Failsafe Protection
Failure Rate
Family
Frequency
Gender
Housing Color
Housing Material
HTS
Impedance
Input Connector Type
Input Frequency
Input Voltage Range
Input Voltage
Insulator Material
Interface
Lead Diameter
Material
Maximum Current Rating
Maximum Input Current
Maximum Output Current
Maximum Response time
Maximum Surge Current
Maximum Voltage Rating
Military Standard
Modes Of Protection
Mounting
Nominal Line Current
Nominal Line Voltage
Number of Circuits
Number of Contacts
Number of Elements
Number of Input Phases
Number of Output Phases
Number of Rows
Number of Terminals
Operating Frequency
Operating Temperature
Output Voltage
Overload Protection
Package Type
Package/Case
Packaging
Part No
Pitch
Power Rating
Pressure
Product Weight
Relay Type
Resistance Value
RoHS
Screening Level
Size
Supplier Temperature Grade
Supplier
Technology
Temperature Coefficient
Tensile Strength
Terminal Pitch
Terminate To
Termination Method
Termination Style
Thermal Resistance
Type
Typical Input Voltage
Unit of Measure
Viscosity
VITA Standard
Voltage
Wire Size
Наименование