ООО "Компания Радионикс" - Модули защиты от перенапряжения

1
...
4
5
6
...
10

Phoenix Contact FLT 100 N/PE-1.5 Lightning current arrester with encapsulated N-PE spark gap - single-channel. Housing width: 35 mm (2 pitches)

Phoenix Contact FLT 35-260 Type 1 / Class I / B arrester (lightning current arrester) with encapsulated arc chopping spark gap - 1-channel. Housing width: 17.5 mm (1 Div.)

Phoenix Contact FLT-CP-3S-350 Pluggable lightning current and surge arrester combination, in acc. with typ 1+2 / Class I+II / B+C arresters. Arresters coordinated following the AEC principle, for 3-phase power supply networks with separately installed PE and N (L1, L2, L3, PE, N).

Phoenix Contact FLT-CP-PLUS-350-ST Type 1 / Class I / B arrester (lightning arrester) replacement plug for paths L-N and L-PEN, can be combined with FLASHTRAB compact series of products.

Phoenix Contact FLT-PLUS CTRL-1.5/I Type 1 / Class I (lightning current arrester) with arc chopping spark gap and ignition electronics, quenching plates for high mains follow-through current quenching capacity, 1-channel. Protection level: 1.5 kV. Housing width: 35 mm (2 Div.)

Phoenix Contact FLT-SEC-P-T1-2C-350/25-FM Plug-in lightning current arrester - in accordance with Type 1/Class I - for 2-phase power supply networks with combined PE and N installed in one conductor (L1 - L2 - PEN).

Phoenix Contact FLT-SEC-P-T1-2S-350/25-FM Plug-in lightning current arrester - in accordance with Type 1/Class I - for 2-phase power supply networks - with separate N and PE (L1 - L2 - PE - N).

Phoenix Contact FLT-SEC-T1+T2-1S-350/25-FM Plug-in lightning and surge arrester combination - in accordance with Type 1+2/Class I+II - for 1-phase power supply networks - with separate N and PE (L1 - PE - N).

Phoenix Contact F-MS 12 Surge arrester type 2 - consisting of base element and protective plug with N-PE total current spark gap for mounting on NS 35/7.5 - housing width: 17.5 mm (1 Div.)

Phoenix Contact F-MS 12/FM Surge arrester type 2 - consisting of base element with remote indicator contact and protective plug with N-PE total current spark gap for mounting on NS 35/7.5 - housing width: 17.5 mm (1 Div.)

Phoenix Contact F-MS 12 ST Surge protection plug type 2 - with N-PE total current spark gap for base element.

Phoenix Contact LIT 1X2-24 Surge protection in the one-piece 6.2 mm DIN rail module for one floating signal circuit in 2-wire technology. Tested according to the protection types in Ex areas Ex ia IIC/Ex iaD. HART-compatible.

Phoenix Contact LIT 4-24 Surge protection in one-piece 6.2 mm wide DIN rail module for four floating signal wires.

Phoenix Contact LIT 4X1-24 Surge protection in one-piece 6.2 mm wide DIN rail module for four conductors with common reference potential.

Phoenix Contact MNT-1 D Attachment plug with surge protection for mains sockets - optical power and error display. For country-specific use in: D - A - I - NL - S - E - N - FIN

Phoenix Contact MT-RS485-TTL Rail-mountable module with surge voltage coarse and fine protection for RS-485 interface - with TTL level - for mounting on NS 35/7.5 - housing width: 50 mm

Phoenix Contact PLT-SEC-T3-3S-230-P Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 3S product range. 230 V nominal voltage.

Phoenix Contact PT 1X2-12DC-ST PT protective connector with protective circuit for a 2-wire floating signal circuit. HART-compatible.

Phoenix Contact PT 1X2-24AC-ST PT protective connector with protective circuit for a 2-wire floating signal circuit. HART-compatible.

Phoenix Contact PT 1X2-24DC/FM-ST Surge protection plug with integrated diagnostic and status indicator on the module and remote indication contact for a 2-wire floating signal circuit.

Phoenix Contact PT 1X2-24DC-ST PT protective connector with protective circuit for a 2-wire floating signal circuit. HART-compatible.

Phoenix Contact PT 1X2-48DC-ST Protective plug PT with protective circuit for a 2-wire floating signal circuit.

Phoenix Contact PT 1X2- 5DC-ST PT protective connector with protective circuit for a 2-wire floating signal circuit. HART-compatible.

Phoenix Contact PT 1X2+F-BE Base element for protective plug PT with protective circuit for a 2-core floating signal circuit. Integrated gas arrester as coarse protection between GND and PE. Mounting on NS 35/7.5 und NS 35/15 - housing width: 17.5 mm.

Phoenix Contact PT 1X2+F-BE/FM Base element to accept a protective plug with diagnostic and status indicator for one floating double wire - integrated spark gap to provide a high-resistance connection between the ground of the protective circuit of the plug and ground potential.

Phoenix Contact PT 2+1-S-48DC-ST Protective plug PT with device surge protection for power supply units - visual error display. Nominal voltage: 48 V AC

Phoenix Contact PT 2-F-ST Surge protection plug for the base element - surge voltage coarse protection for two signal lines grounded on one side.

Phoenix Contact PT 2-TELE Surge protective device - consisting of plug and base element - for protecting a double wire from analog and digital telecommunications interfaces (VDSL up to 50 Mbps - on short paths ( P

Phoenix Contact PT 2X1-12DC-ST Surge protection plug for the base element - coarse and fine protection for two signal wires with common reference potential - common mode voltage coarse protection to ground. Design: 12 V DC

Phoenix Contact PT 2X1-24AC-ST Surge protection plug for the base element - coarse and fine protection for two signal wires with common reference potential - common mode voltage coarse protection to ground. Design: 24 V AC

Phoenix Contact PT 2X1-24DC/FM-ST Surge protection plug with integrated diagnostic and status indicator on the module and remote indication contact for two signal wires with common reference potential. Nominal voltage: 24 V DC

Phoenix Contact PT 2X1-24DC-ST Surge protection plug for the base element - coarse and fine protection for two signal wires with common reference potential - common mode voltage coarse protection to ground. Design: 24 V DC

Phoenix Contact PT 2X1-BE Base element for protective plug PT with protective circuit for 2 conductors of signal circuits grounded on one side. Mounting on NS 35/7.5 und NS 35/15 - housing width: 17.5 mm.

Phoenix Contact PT 2X1+F-BE/FM Base element to accept a protective plug with diagnostic and status indicator for two signal wires with common reference potential - integrated spark gap to provide a high-resistance connection between the ground of the protective circuit of the plug and

Phoenix Contact PT 2X1-VF-230AC Rail-mountable surge arrester for higher signal voltages. Protective circuit free of leakage current for two floating signals.Nominal voltage: 230 V AC

Phoenix Contact PT 2X2-12AC-ST Surge protection plug for the base element, for two floating double wires, common mode voltage coarse protection to ground. 12 V AC nominal voltage. HART-compatible.

Phoenix Contact PT 2X2-12DC-ST PT protective connector with protective circuit for two 2-wire floating signal circuits. 12 V DC nominal voltage. HART-compatible.

Phoenix Contact PT 2X2-24AC-ST PT protective connector with protective circuit for two 2-wire floating signal circuits. 24 V AC nominal voltage. HART-compatible.

Phoenix Contact PT 2X2-24DC-ST PT protective connector with protective circuit for two 2-wire floating signal circuits. 24 V DC nominal voltage. HART-compatible.

Phoenix Contact PT 2X2- 5DC-ST PT protective connector with protective circuit for two 2-wire floating signal circuits. 5 V DC nominal voltage. HART-compatible.

Phoenix Contact PT 2X2-BE Base element for protective plug PT with protective circuit for two 2-wire floating signal circuit - bridge between the connections 3-4 (GND) and 9-10 - for mounting on NS 35/7.5 and NS 35/15 - housing width: 17.5 mm

Phoenix Contact PT 2X2-HF-12 DC-ST Surge protection plug for the base element - normal mode voltage coarse and fine protection for two floating double wires in IT. Design: 12 V DC

Phoenix Contact PT 2X2-HF-24 DC-ST Protective plug PT with HF protective circuit for two 2-core floating signal circuits. Nominal voltage: 24 V DC

Phoenix Contact PT 2X2-HF- 5 DC-ST Protective plug PT with HF protective circuit for two 2-core floating signal circuits. Nominal voltage: 5 V DC

Phoenix Contact PT 2XEX(I)-24DC-ST PT protective plug with protective circuit for two 2-wire floating Ex i signal circuits. Nominal voltage: 24 V DC - HART-compatible.

Phoenix Contact PT 3-HF-12DC-ST Surge protection plug for the base element - normal mode voltage coarse and fine protection for two floating signal wires and ground in IT - common mode voltage coarse protection to ground/earth. Design: 12 V DC

Phoenix Contact PT 3-PB-ST Surge protection plug for the base element - normal mode voltage coarse and fine protection for two floating signal wires in IT - common mode voltage coarse protection to ground.

Phoenix Contact PT 4-12DC-ST Protective plug PT with protective circuit for a 4-core floating signal circuit. Nominal voltage: 12 V DC

Phoenix Contact PT 4-24DC-ST Protective plug PT with protective circuit for a 4-core floating signal circuit. Nominal voltage: 24 V DC

Phoenix Contact PT 4-BE Base element for protective plug PT with protective circuit for a 4-wire floating signal circuit - bridge between the connections 3-4 (GND) and 9-10 - for mounting on NS 35/7.5 and NS 35/15 - housing width: 17.5 mm

Phoenix Contact PT 4-EX(I)-24DC-ST PT protective connector with protective circuit for a 4-wire floating Ex-i signal circuit. Nominal voltage: 24 V DC

Phoenix Contact PT 4-EX(I)-BE Base element for protective plug PT with protective circuit for a 4-core floating EEx ia signal circuit. Nominal voltage: 24 V DC - for mounting on NS 35/7.5 and NS 35/15 - housing width: 17.5 mm

Phoenix Contact PT 4+F-BE Base element for protective plug PT with protective circuit for a 4-wire floating signal circuit - gas-filled surge arrester between the connections 3-4 (GND) and 9-10 - for mounting on NS 35/7.5 and NS35/15 - housing width: 17.5 mm

Phoenix Contact PT 4-F-ST Surge protection plug for the base element - coarse protection for four signal lines grounded on one side.

Phoenix Contact PT 4X1-12AC-ST Protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side. Nominal voltage: 12 V AC

Phoenix Contact PT 4X1-12DC-ST Protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side. Nominal voltage: 12 V DC

Phoenix Contact PT 4X1-24AC-ST Protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side. Nominal voltage: 24 V AC

Phoenix Contact PT 4X1-48DC-ST Surge protection plug for the base element - common mode voltage coarse and fine protection for four lines with a common reference potential. Design: 48 V DC

Phoenix Contact PT 4X1-BE Base element for protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side - with bridge between the connections 3-4 (GND) and 9-10 - for mounting on NS 35/7.5 and NS 35/15 - housing width: 17.5 mm

Phoenix Contact PT 4X1+F-BE Base element for protective plug PT with protective circuit for 4 signal wires - with gas-filled surge arrester between the connections 3-4 (GND) and 9-10 - for mounting on NS 35/7.5 and NS 35/15 - housing width: 17.5 mm

Phoenix Contact PT 5-HF-12 DC-ST Protective plug PT with HF protective circuit for 4 signal wires. Nominal voltage: 12 V DC

Phoenix Contact PT 5-HF- 5 DC-ST Protective plug PT with HF protective circuit for 4 signal wires. Nominal voltage: 5 V DC

Phoenix Contact PT-BE/FM Base element for protective plug PT - for mounting on NS 35/7.5 and NS 35/15 - housing width: 17.5 mm

Phoenix Contact PT-IQ-1X2-12DC-UT Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for one 2-wire floating signal circuit.

Phoenix Contact PT-IQ-1X2-24DC-P Surge protection plug with integrated multi-stage status indicator on the module for a 2-wire floating signal circuit. 24 V DC nominal voltage.

Phoenix Contact PT-IQ-1X2-48DC-PT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for one 2-wire floating signal circuit.

Phoenix Contact PT-IQ-1X2-48DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for one 2-wire floating signal circuit.

Phoenix Contact PT-IQ-1X2-EX-24DC-P Surge protection plug with integrated multi-stage status indicator on the module for one 2-wire floating Ex-i signal circuit. Nominal voltage: 24 V DC

Phoenix Contact PT-IQ-1X2+F-12DC-UT Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for one 2-wire floating signal circuit. Indirect grounding via gas-filled surge arrester.

Phoenix Contact PT-IQ-1X2+F-24DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for one 2-wire floating signal circuit. Indirect grounding via gas-filled surge arrester.

Phoenix Contact PT-IQ-1X2+F-48DC-UT Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for one 2-wire floating signal circuit. Indirect grounding via gas-filled surge arrester.

Phoenix Contact PT-IQ-1X2+F-5DC-UT Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for one 2-wire floating signal circuit. Indirect grounding via gas-filled surge arrester.

Phoenix Contact PT-IQ-2X1-12DC-UT Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two signal wires with common reference potential.

Phoenix Contact PT-IQ-2X1-24DC-P Surge protection plug with integrated multi-stage status indicator on the module for two signal wires with common reference potential. 24 V DC nominal voltage.

Phoenix Contact PT-IQ-2X1-24DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for two signal wires with common reference potential.

Phoenix Contact PT-IQ-2X1-48DC-UT Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two signal wires with common reference potential.

Phoenix Contact PT-IQ-2X1-5DC-UT Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two signal wires with common reference potential.

Phoenix Contact PT-IQ-2X1+F-12DC-UT Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two signal wires with common reference potential. Indirect grounding via gas-filled surge arrester.

Phoenix Contact PT-IQ-2X1+F-24DC-PT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for two signal wires with common reference potential. Indirect grounding via gas-filled surge arrester.

Phoenix Contact PT-IQ-2X1+F-24DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for two signal wires with common reference potential. Indirect grounding via gas-filled surge arrester.

Phoenix Contact PT-IQ-2X1+F-48DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for two signal wires with common reference potential. Indirect grounding via gas-filled surge arrester.

Phoenix Contact PT-IQ-2X1+F-5DC-UT Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for two signal wires with common reference potential. Indirect grounding via gas-filled surge arrester.

Phoenix Contact PT-IQ-2X2-24DC-P Surge protection plug with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits. 24 V DC nominal voltage.

Phoenix Contact PT-IQ-2X2-24DC-PT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits.

Phoenix Contact PT-IQ-2X2-EX-24DC-P Surge protection plug with integrated multi-stage status indicator on the module for two 2-wire floating Ex-i signal circuits. Nominal voltage: 24 V DC

Phoenix Contact PT-IQ-2X2-EX-24DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for two 2-wire floating Ex-i signal circuits. HART-compatible.

Phoenix Contact PT-IQ-2X2+F-24DC-PT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module - for two 2-wire floating signal circuits. Indirect grounding via gas-filled surge arrester - HART-compatible.

Phoenix Contact PT-IQ-2X2+F-24DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits. Indirect grounding via gas discharge tube - HART-compatible.

Phoenix Contact PT-IQ-2X2+F-48DC-PT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits. Indirect grounding via gas-filled surge arrester.

Phoenix Contact PT-IQ-2X2+F-48DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for two 2-wire floating signal circuits. Indirect grounding via gas-filled surge arrester.

Phoenix Contact PT-IQ-3-HF-12DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply vol

Phoenix Contact PT-IQ-3-HF+F-12DC-PT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply vol

Phoenix Contact PT-IQ-3-HF+F-12DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for three signal wires with common reference potential. For HF applications and telecommunications interfaces without supply vol

Phoenix Contact PT-IQ-4X1-24DC-PT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for four signal wires with common reference potential.

Phoenix Contact PT-IQ-4X1-24DC-UT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for four signal wires with common reference potential.

Phoenix Contact PT-IQ-4X1+F-24DC-PT Surge protection - consisting of protective plug and base element - with integrated multi-stage status indicator on the module for four signal wires with common reference potential. Indirect grounding via gas-filled surge arrester.

1
...
4
5
6
...
10

Категории

COO

CA
CN
CZ
DE
FR
GR
ID
IN
JP
MX
PL
RO
SI
TW
US