ООО "Компания Радионикс" - Other

1
...
8
9
10
...
16

Type: N/A

Panduit PCL100-C Vinyl Cloth Letter, Black/Yellow, 1.00 H Legend, C

Panduit PCL100-R Vinyl Cloth Letter, Black/Yellow, 1.00 H Legend, R

Panduit PLD-58 Electrical label in dispenser, 1.5" W x .1.00" H, 'Caution sensitive electronic devices...' (legend), polyester adhesive, black/yellow, 200 labels per package.

Panduit PLD-67 Electrical label in dispenser, 1.5" W x 1.0" H, 'Danger high voltage' (legend) with hand symbol, polyester adhesive, red/white, 200 labels per package.

Panduit PN12-14HDR-2K Ring Tongue Terminal 12-16AWG 30.48mm 13.2mm Tin Strip

Panduit PRL150YB-2 Reflective number, 1.5" legend height, '2' (legend), reflective vinyl, yellow/black, 25 markers/package, 1 pc. package quantity.

Panduit PRL250YB-2 Reflective number, 2.5" legend height, '2' (legend), reflective vinyl, yellow/black, 25 markers/package, 1 pc. package quantity.

Panduit PRL250YB-3 Reflective number, 2.5" legend height, '3' (legend), reflective vinyl, yellow/black, 25 markers/package, 1 pc. package quantity.

Panduit PSL-DCJB Jack module block-out device, 10 block-outs (red) and 1 removal tool (black), polycarbonate.

Panduit PSL-DCJB-GR Package Of Ten Jack Module Blackout Devices And One Removal Tool

Panduit PUM-049-2S-D30 The fir tree push mount assembly is black and requires a panel hole diameter of 0.18 to 0.19" (4.6 to 4.9 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 5

Panduit PUM-049-C30 The fir tree push mount is black and requires a panel hole diameter of 0.18 to 0.19" (4.6 to 4.9 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Panduit PUM-049-M30 The fir tree push mount is black and requires a panel hole diameter of 0.18 to 0.19" (4.6 to 4.9 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 1000.

Panduit PUM-071-2S-D30 The fir tree push mount assembly is black and requires a panel hole diameter of 0.25 to 0.28" (6.3 to 7.1 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 5

Panduit PUM-071-C30 The fir tree push mount is black and requires a panel hole diameter of 0.25 to 0.28" (6.3 to 7.1 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Panduit PUM-071-M30 The fir tree push mount is black and requires a panel hole diameter of 0.25 to 0.28" (6.3 to 7.1 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 1000.

Panduit PUM-100-2S-D30 The fir tree push mount assembly is black and requires a panel hole diameter of 0.35 to 0.40" (9.0 to 10.0mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 5

Panduit PUM-925-3H-T30 The fir tree push mount assembly is black and requires a panel hole diameter of 0.34" to 0.36" (8.8 to 9.3 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of

Panduit PUM-925-C30 The fir tree push mount is black and requires a panel hole diameter of 0.34 to 0.36" (8.8 to 9.3 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Panduit PUM-925-M30 The fir tree push mount is black and requires a panel hole diameter of 0.34 to 0.36" (8.8 to 9.3mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 1000.

Panduit PV14-6FF-C Flanged Fork Terminal, vinyl insulated, funnel entry, 16- 14 AWG, #6 stud size, standard package.

Panduit PV18-8FX-MY Hook And Loop Cable Tie Strips 12.0" Standard Cross Section

Panduit PVT-96 Write-on safety tag, 3.00" W x 5.75" H, danger header, 'Equipment locked out' (legend), semi-rigid vinyl, red and black/white, 5 tags and ties/package.

Panduit S200X400VA1Y The thermal transfer self-laminating adhesive label is made of vinyl and is supplied on a roll with 2 labels per row. The label has a white colored print-on area 1.0" (25.4 mm) high for 2 -1 AWG wires and a clear overlaminate. It is 2.0" wide and 4.0" lon

Panduit SD3HWH6 Panduct® slotted divider wall, 3.00" nominal duct height, 6' length, PVC, white.

Panduit SD4HWH6 Panduct® slotted divider wall, 4.00" nominal duct height, 6' length, PVC, white.

Panduit SGABM20-A-C The adhesive mount in white is mounted with rubber adhesive tape and measures 0.75" x 0.75" (19.1 mm x 19.1 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for indoor environments

Panduit SGABM20-AV-C300 The super grip adhesive backed cable tie mount in black is mounted with very high-bond adhesive and measures 0.75" x 0.75" (19.1 mm x 19.1 mm). It is made of heat-stabilized weather-resistant nylon 6.6, which increases mechanical strength, heat and wear r

Panduit SGABM25-AV-C300 The super grip adhesive backed cable tie mount in black is mounted with very high-bond adhesive and measures 1" x 1" (25.4 mm x 25.4 mm). It is made of heat-stabilized weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resista

Panduit SGABM30-AV-C300 The super grip adhesive backed cable tie mount in black is mounted with very high-bond adhesive and measures 1.12" x 1.12" (28.6 mm x 28.6 mm). It is made of heat-stabilized weather-resistant nylon 6.6, which increases mechanical strength, heat and wear r

Panduit SSFW38-C Stainless Steel Mounting Hardware; 3/8 Stainless Steel Flat

Panduit SSNTS3816-C Stainless Steel Mounting Hardware; 3/8 Stainless Steel Bolts

Panduit TDP43ME-RS External label roll stand for TDP43ME printer; used to rear feed labels that are supplied on 3" cores.

Panduit TJF-X Harness board t-junction fixture, 1.34" (34.0mm) bundle.

Panduit TM3S2510-M39 Cable Tie Mount - Screw Applied

Panduit UICBX2IW-A Mini-Com Ultimate Id 2 Position Surface Mount Box

Panduit UICFPSE8IG-2G Double gang, vertical Ultimate ID® faceplate holds up to eight Mini-Com® Modules. International Gray.

Philmore Mfg. 70-8802 Computer - Usb Cables And Adaptors

Philmore Mfg. 75-4420B Telephone Wall Plates

Philmore Mfg. 75-4422B Telephone Wall Plates

Philmore Mfg. FH65B Cb And Automotive Accessories

Philmore Mfg. PE296 Home / Office Accessories

Phoenix Contact 1201028 DIN rail - unperforated - G profile - width: 32 mm - height: 15 mm - similar to EN 60715 - material: Aluminum - uncoated - length: 2000 mm - color: silver

Phoenix Contact 1201578 Rail adapters - for M3 screws - length: 42.6 mm - width: 10 mm - height: 19 mm - color: gray

Phoenix Contact 2708863 Modular repeater for electrical isolation and range increase for PROFIBUS up to 12 Mbps - 4-way isolation - rail-mountable - supply 24 V DC

Phoenix Contact 2865434 Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via a relay output (PDT contact) to the safe area. Line fault detection (LFD) - 3-way isolation - SIL 2.

Phoenix Contact 2865625 Power and fault signaling module with screw connection - including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector

Phoenix Contact 2867102-DRX Uni-Directional, Wireless, 900MHz Transmission System

Phoenix Contact 2902061 Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of unipolar and bipolar analog signals. Input configurable via DIP switch. Screw connection technology - standard configuration.

Phoenix Contact 2938235 Universal wall adapter for securely mounting the device in the event of strong vibrations. The device is screwed directly onto the mounting surface. The universal wall adapter is attached on the top/bottom.

Phoenix Contact 5144699 Plastic magazines for CMS-P1-PLOTTER and PLOTMARK. For accommodating 22 zack marker strips

Phoenix Contact AB-SK/E Support bracket - Bracket for busbars - set every 20 cm - length: 10 mm - width: 56 mm - height: 20 mm - number of positions: 2 - color: silver

Phoenix Contact AXL E IOL AO1 I M12 R Axioline E-IO-Link/analog converter for connecting an analog actuator - 4 mA ... 20 mA - M12 fast connection technology - angled version

Phoenix Contact AXL E IOL AO1 U M12 R Axioline E-IO-Link/analog converter for connecting an analog actuator - 0 V ... 10 V - M12 fast connection technology - angled version

Phoenix Contact AXL F AI8 1F Axioline F - Analog input module - Analog inputs: 8 - 0 V ... 5 V - -5 V ... 5 V - 0 V ... 10 V - -10 V ... 10 V - 0 mA ... 20 mA - 4 mA ... 20 mA - -20 mA ... 20 mA - connection method: 2-wire - transmission speed in the local bus: 100 Mbps - degree of p

Phoenix Contact AXL F AO8 1F Axioline F - Analog output module - Analog outputs: 8 - 0 V ... 5 V - -5 V ... 5 V - 0 V ... 10 V - -10 V ... 10 V - 0 mA ... 20 mA - 4 mA ... 20 mA - -20 mA ... 20 mA - connection method: 2-wire - transmission speed in the local bus: 100 Mbps - degree of

Phoenix Contact AXL F CNT2 INC2 1F Axioline F - Function module - Counter input for 24 V signals: 2 - Incremental encoder inputs: 2 - Symmetrical and asymmetrical encoders - Digital inputs: 8 - 24 V DC - Digital outputs: 2 - 24 V DC - transmission speed in the local bus: 100 Mbps - degree

Phoenix Contact AXL SHIELD SET Axioline shield connection set (contains 2 shield bus holders and 2 SK 5 shield connection clamps)

Phoenix Contact BE-RT 3/5 Path extension - color: gray

Phoenix Contact BE-RT 8 Path extension - color: gray

Phoenix Contact BLUEMARK MAG AI-WM Magazine for BLUEMARK printer - for accommodating 0.5 - 1.5 mm² ferrules with insulating collar that can be labeled

Phoenix Contact BRIDGE-10 3-phase loop bridge for 10 CONTACTRON modules - with screw connection and 22.5 mm housing width - connecting cable: 0.3 m - with ferrules.

Phoenix Contact BRIDGE- 2 3-phase loop bridge for 2 CONTACTRON modules - with screw connection and 22.5 mm housing width - connecting cable: 0.3 m - with ferrules.

Phoenix Contact BRIDGE- 7 3-phase loop bridge for 7 CONTACTRON modules - with screw connection and 22.5 mm housing width - connecting cable: 0.3 m - with ferrules.

Phoenix Contact BRIDGE- 9 3-phase loop bridge for 9 CONTACTRON modules - with screw connection and 22.5 mm housing width - connecting cable: 0.3 m - with ferrules.

Phoenix Contact CD WR Universal wire holding bracket - perforated - for wiring channels

Phoenix Contact C-ME 6/3 Operating lever - length: 5 mm - width: 24.1 mm - height: 5 mm - number of positions: 3 - color: orange

Phoenix Contact CMS-P1-M/ZB Plastic magazines for CMS-P1-PLOTTER and PLOTMARK. For accommodating 22 zack marker strips

Phoenix Contact CN-LAMBDA/4-5.9-BB Attachment plug with Lambda/4 technology as surge protection for coaxial signal interfaces. Connection: N connectors socket-socket

Phoenix Contact CN-UB/MP Tongue for attaching the CN-UB... - to housing panels - for example.

Phoenix Contact CP-HC Coding profile - 4 coding profiles per strip - for insertion in coding keyways

Phoenix Contact CRIMPFOX/ SPR-3 Spare recuperating spring

Phoenix Contact D-DTME 6 End cover - length: 99.8 mm - width: 2.2 mm - height: 49.6 mm - color: gray

Phoenix Contact DP PS-6 Spacer plate - length: 22.4 mm - width: 6.2 mm - height: 29 mm - number of positions: 1 - color: red

Phoenix Contact DP-UW 4 Spacer plate - number of positions: 0 - pitch: 0 mm - color: gray

Phoenix Contact DP-UWV 16 Spacer plate - number of positions: 0 - pitch: 0 mm - color: gray

Phoenix Contact DS-ST 4 Cover segment - length: 87 mm - height: 36.5 mm - color: gray

Phoenix Contact D-UTME 4 Cover - width: 2.2 mm

Phoenix Contact D-UTME 4-CT/1P Cover - width: 2.2 mm

Phoenix Contact EB 10-15 K/UK 35 Insertion bridge - pitch: 15 mm - number of positions: 10 - color: gray

Phoenix Contact EMG 30-SP-10K LIN Setpoint value potentiometer - to set setpoints individually - resistance value 10 kÎ©

Phoenix Contact EMG 30-SP- 4K7LIN Setpoint value potentiometer - to set setpoints individually - resistance value 4,7 kÎ©

Phoenix Contact ESL 26X6 Insert strip - Sheet - white - unlabeled - can be labeled with: Office printing systems - perforated - mounting type: insert - lettering field size: 26 x 6 mm - Number of individual labels: 266

Phoenix Contact ESL 29X8 Insert strip - Sheet - white - unlabeled - can be labeled with: Office printing systems: Laser printer - perforated - mounting type: insert - lettering field size: 29 x 8 mm - Number of individual labels: 174

Phoenix Contact ESL 62X46 Insert strip - Sheet - white - unlabeled - can be labeled with: Office printing systems: Laser printer - mounting type: insert - lettering field size: 62 x 46 mm - Number of individual labels: 120

Phoenix Contact FB 10-10-EX Fixed bridge - pitch: 10 mm - number of positions: 10 - color: silver

Phoenix Contact FB 10-13 Fixed bridge - pitch: 13 mm - number of positions: 10 - color: silver

Phoenix Contact FB 10- 6-EX Fixed bridge - pitch: 6.2 mm - number of positions: 10 - color: silver

Phoenix Contact FB 10- URTK/SP Fixed bridge - pitch: 8.2 mm - number of positions: 10 - color: silver

Phoenix Contact FBI 10-12 Fixed bridge - pitch: 12 mm - length: 7.5 mm - width: 118.4 mm - number of positions: 10 - color: silver

Phoenix Contact FBI 20- 6 Fixed bridge - pitch: 6.2 mm - number of positions: 20 - color: silver

Phoenix Contact FBR 10-5-EX Fixed bridge - pitch: 5 mm - number of positions: 10 - color: silver

Phoenix Contact FBRNI 20-5 N Fixed bridge - number of positions: 20 - color: silver

Phoenix Contact FBST 500-PLC BN Continuous plug-in bridge - length: 500 mm - color: brown

Phoenix Contact FBST 500-PLC BU Continuous plug-in bridge - length: 500 mm - color: blue

Phoenix Contact FBST 500-PLC GY Continuous plug-in bridge - length: 500 mm - color: gray

1
...
8
9
10
...
16

Категории

COO