ООО "Компания Радионикс" - Other

1
...
39
40
41
...
57

Phoenix Contact FL ISOLATOR 1000-RJ/RJ Passive network isolator for electrical isolation in Ethernet networks. This protects Ethernet devices from potential differences of up to 4 kV. Can be used for transmission speeds of up to 1 Gbps. Possible to connect two RJ45 plugs.

Phoenix Contact FL MEM PLUG Exchangeable configuration memory of the device settings for simple device exchange and set-up

Phoenix Contact FL MEM PLUG/MRM Exchangeable configuration memory of the device settings for simple device exchange and set-up In addition - the Media Redundancy Manager (MRM) license for use is stored within the Media Redundancy protocol (MRP).

Phoenix Contact FL MGUARD LIC LIFETIME FW License for lifetime software update of FL MGUARD field devices.

Phoenix Contact FL MGUARD LIC VPN-10 License for up to 10 additional VPN online connections

Phoenix Contact FL MGUARD LIC VPN-250 License for up to 250 additional VPN online connections

Phoenix Contact FL PATCH GUARD Lockable security element

Phoenix Contact FL RUGGED BOX POLE SET Set for mast mounting of the FL RUGGED BOX housing - incl. screw clamps for masts up to a diameter of 89 mm

Phoenix Contact FL SFP SX Gigabit SFP module for transmission up to 1 km with a wavelength of 850 nm.

Phoenix Contact FL SWITCH SFN 4TX/FX Ethernet switch - 4 TP RJ45 ports - 1 FO port - 100 Mbps full duplex in SC-D format - automatic detection of data transmission speed of 10 or 100 Mbps (RJ45) - autocrossing function

Phoenix Contact FRONT-MSTB-EW Removal aid, for FRONT-MSTB, facilitates extraction of several plugs mounted behind each other

Phoenix Contact GW PL DIO4-BUS Four-channel digital input and four-channel digital output module with screw connection

Phoenix Contact GW PL ETH/UNI-BUS Ethernet head station for modular HART gateway. Connect up to five GW PL HART€¦-BUS expansion modules to communicate with up to 40 HART devices. Supports Modbus TCP - OPC UA - PROFINET - HART IP - FDT/DTM and Arcom.

Phoenix Contact GW PL HART4-BUS Four-channel HART® expansion module - with screw connection

Phoenix Contact GW PL HART8+AI-BUS Eight-channel HART® expansion module with analog loop supply and screw connection

Phoenix Contact HC-B 10-24-QB Replacement latch for HC-B10 / HC-B16/ HC-B24 housings with double locking latch (plastic design)

Phoenix Contact HC-B-AF Panel mounting flange for HEAVYCON-ADVANCE TMS housing with screw locking

Phoenix Contact HC-B-AF-SET Panel mounting flange for screw locking - set comprising 2 panel mounting flanges with 4 self-tapping screws (M4 - Torx®) and 4 fan-type washers

Phoenix Contact HC-BS-PG29 Screw plug - material: Brass - nickel-plated - connecting thread: Pg29 - color: silver

Phoenix Contact HC-B-ZG Strain relief clamps contact inserts of series: B- - BB- - D 40 - D 64 - DD and HV - straight cable exit

Phoenix Contact HC-B-ZS Strain relief clamps contact inserts of series: B- - BB- - D 40 - D 64 - DD and HV - lateral cable exit

Phoenix Contact HC-COM-K-KV-PG16(9-12) SML Pg16 screw connection accessories for box mounting base with cable diameter 9 mm ... 12 mm

Phoenix Contact HC-KA-FE Foot element - for mounting on DIN rail NS 32 - DIN rail NS 35/7.5 or DIN rail NS 35/15 - can be inserted between basic and side element

Phoenix Contact HC-M-BS-M20 Filler plug - metal - size: M20

Phoenix Contact HC-MOD-K-CP Coding profile for HC-MOD-K... housing

Phoenix Contact HC-SMP 150-B24-AMQ HEAVYCON connector assembly frame with panel mounting base with double locking latch, for contact inserts of type B24, 150 mm long

Phoenix Contact HMI SCB MOUNTING KIT 4 HMI mounting kit for installation on a front plate. The mounting kit includes 4 x mounting brackets - 4 x screw threads - and a hexagonal wrench.

Phoenix Contact HMI WALL MOUNTING KIT HMI mounting kit for panel installation. The mounting kit includes 2 spring clips.

Phoenix Contact HV M10/1-VS 3 Connection element - length: 96 mm - width: 25 mm - height: 4 mm - number of positions: 3 - color: silver

Phoenix Contact HV M6/1-AP Cover profile - for single-bolt terminal block M6 - length: 70 mm - width: 16 mm - height: 6.5 mm - color: gray

Phoenix Contact HV M6/1-VS 2 Connection element - length: 91.3 mm - width: 42.8 mm - height: 11.4 mm - number of positions: 2 - color: silver

Phoenix Contact HV M6/1-VS 3 Connection element - length: 50 mm - width: 15 mm - height: 4 mm - number of positions: 3 - color: silver

Phoenix Contact IB IL 24 DI 16-ME Inline - Digital input terminal - Digital inputs: 16 - 24 V DC - connection method: 3-wire - transmission speed in the local bus: 500 kbps - degree of protection: IP20 - including Inline connectors and marking fields

Phoenix Contact IB IL 24 DI8/HD-PAC Inline - Digital input terminal - Digital inputs: 8 - 24 V DC - connection method: 1-wire - transmission speed in the local bus: 500 kbps - degree of protection: IP20 - including Inline connector and labeling field

Phoenix Contact IB IL 24 DO 16-ME Inline - Digital output terminal - Digital outputs: 16 - 24 V DC - 500 mA - connection method: 3-wire - transmission speed in the local bus: 500 kbps - degree of protection: IP20 - including Inline connectors and marking fields

Phoenix Contact IB IL 24 DO8/HD-PAC Inline - Digital output terminal - Digital outputs: 8 - 24 V DC - 500 mA - connection method: 1-wire - transmission speed in the local bus: 500 kbps - degree of protection: IP20 - including Inline connector and labeling field

Phoenix Contact IB IL 24 PWR IN/R-PAC Inline power terminal or boost terminal - complete with accessories (connector and labeling field) - 24 V DC - without fuse

Phoenix Contact IB IL FIELD 2 Labeling field - width: 12.2 mm

Phoenix Contact IB IL FIELD 8 Labeling field - width: 48.8 mm

Phoenix Contact IB IL SCN-6 SHIELD Inline shield connector

Phoenix Contact IFS-BT-PROG-ADAPTER Bluetooth adapter with micro USB and S-PORT interface for wireless communication with the MINI Analog - MINI Analog Pro - MACX Analog - INTERFACE system gateways - and PLC logic device series.

Phoenix Contact IFS-CONFSTICK Multi-functional memory block for the INTERFACE systemf for easy storage and backup of the configuration.

Phoenix Contact IFS-OP-UNIT The operator interface facilitates straightforward parameterization and operation of the MACX MCR(-EX)-...-UI(REL)(-UP) on-site - even without software. Can be snapped onto the 35 mm module. Replacement part: 2905872 IFS-BT-PROG-ADAPTER.

Phoenix Contact ILC 131 ETH The Inline controller offers the option of communicating via PROFINET and Modbus/TCP. Programming is carried out using PC Worx Express or PC Worx (IEC 61131-3).

Phoenix Contact ILC 151 ETH The Inline controller offers the option of communicating via PROFINET and Modbus/TCP. Programming is carried out using PC Worx Express or PC Worx (IEC 61131-3).

Phoenix Contact ILC 151 ETH/XC Inline controller for use under harsh ambient conditions - with Ethernet interface for coupling to other controllers and systems - with programming options according to IEC 61131-3 - complete with connector and labeling field.

Phoenix Contact ILC 171 ETH 2TX The Inline controller offers the option of communicating via PROFINET and Modbus/TCP. Programming is carried out using PC Worx Express or PC Worx (IEC 61131-3).

Phoenix Contact ILC 191 ETH 2TX The Inline controller offers the option of communicating via PROFINET and Modbus/TCP. Programming is carried out using PC Worx Express or PC Worx (IEC 61131-3).

Phoenix Contact ILC 191 ME/AN Inline controller with integrated pulse/direction/PWM interface - RS-485/RS-422 - analog inputs (0 ... 10 V) - and analog outputs (0 ... 10 V) - with programming options according to IEC 61131-3

Phoenix Contact ILC 191 ME/INC Inline controller with integrated pulse/direction/PWM interface, RS-485/RS-422, fast counters, and incremental encoder inputs, with programming options according to IEC 61131-3

Phoenix Contact MACX MCR-I20 Connection terminal block for current signals - +20 mA ... -20 mA - for safe switching of limit values - in combination with MACX ...-T-UI... temperature transducers.

Phoenix Contact MACX MCR-PTB Power and fault signaling module with screw connection - including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector

Phoenix Contact ME-MAX-NEF/QUINT20A Filter for adherence to the EMC category EMC1 in shipbuilding for the QUINT-PS/1AC/24DC/20 power supply

Phoenix Contact MINI MCR-2-FM-RC Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology - standard configuration

Phoenix Contact MINI MCR-2-FM-RC-PT Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology - standard configuration

Phoenix Contact MINI MCR-2-RTD-UI Configurable temperature transducer with plug-in connection technology for connecting 2 - 3 - and 4-conductor resistance thermometers and resistance-type sensors. Configurable via DIP switch or software. Screw connection technology - standard configuratio

Phoenix Contact MINI MCR-SL-UI-UI-NC 3-way isolating amplifier for the electrical isolation of analog signals - I/O can be configured via DIP switches - with screw connection - standard configuration

Phoenix Contact MPB 18/1- 6 Wiring bridge for modules with connecting pitch 17.5 mm - 1-phase - 6-pos.

Phoenix Contact MPB 18/1- 8 Wiring bridge for modules with connecting pitch 17.5 mm - 1-phase - 8-pos.

Phoenix Contact MPB 18/3- D End cover for lateral connection of wiring bridges - 3-phase

Phoenix Contact MPS-IH BK Insulating sleeve - color: black

Phoenix Contact MPS-IH BU Insulating sleeve - color: blue

Phoenix Contact MPS-IH GN Insulating sleeve - color: green

Phoenix Contact MPS-IH GY Insulating sleeve - color: gray

Phoenix Contact MPS-IH RD Insulating sleeve - color: red

Phoenix Contact MPS-IH WH Insulating sleeve - color: white

Phoenix Contact MPS-IH YE Insulating sleeve - color: yellow

Phoenix Contact MPS-MT Test plugs - with solder connection up to 1 mm² conductor cross section - color: gray

Phoenix Contact MTKD-CU/CUNI Thermoelectric voltage terminal block pair - TC type T - nom. voltage: 400 V - nominal current: 1 A - connection method: Screw connection - number of connections: 4 - number of positions: 2 - cross section: 0.2 mm² - 4 mm² - AWG: 24 - 12 - width: 10.4 mm

Phoenix Contact NLS-CU 3/10 SN 1000MM Neutral busbar - width: 10 mm - height: 3 mm - DIN VDE 0611-4: 1991-02 - material: Copper - tin-plated - length: 1000 mm - color: silver

Phoenix Contact NLS-CU 3/10 SN 2000MM Neutral busbar - width: 10 mm - height: 3 mm - DIN VDE 0611-4: 1991-02 - material: Copper - tin-plated - length: 2000 mm - color: silver

Phoenix Contact NS 15 WH PERF 2000MM DIN rail perforated - Standard profile - width: 15 mm - height: 5.5 mm - acc. to EN 60715 - material: Steel - Galvanized - white passivated - length: 2000 mm - color: silver

Phoenix Contact NS 32 AL UNPERF 2000MM DIN rail - unperforated - G profile - width: 32 mm - height: 15 mm - similar to EN 60715 - material: Aluminum - uncoated - length: 2000 mm - color: silver

Phoenix Contact NS 35/15 WH UNPERF 2000MM DIN rail - unperforated - Standard profile - width: 35 mm - height: 15 mm - similar to EN 60715 - material: Steel - Galvanized - white passivated - length: 2000 mm - color: silver

Phoenix Contact P1 UC-MAG 4 Magazine - for CMS-P1-PLOTTER and PLOTMARK - for accommodating UC-TMF... - UC1-TMF... - UC-WMT...

Phoenix Contact P1 UC-MAG 5 Magazine - for CMS-P1-PLOTTER - for accommodating UC1-TM... - UC1U-TM...

Phoenix Contact P1 UC-MAG 6 Magazine - for CMS-P1-PLOTTER and PLOTMARK - for accommodating UC-EMP... - UC-EMLP...

Phoenix Contact PACT RCP-CLAMP The optional holding device ensures the Rogowski coil is securely seated on busbars with a thickness of 10 ... 15 mm. During installation - the coil housing is pushed onto the flange of the holding device and snaps in automatically.

Phoenix Contact PAI-4-FIX-5/6 YE 4 mm test adapter - for terminal blocks with 5.2 mm and 6.2 mm pitch

Phoenix Contact PAI-4-FIX BK Test adapter - for 4 mm test plug and terminal blocks with 8.2 mm pitch - color: black

Phoenix Contact PAI-4-FIX BU Test adapter - for 4 mm test plug and terminal blocks with 8.2 mm pitch - color: blue

Phoenix Contact PAI-4-FIX GN Test adapter - for 4 mm test plug and terminal blocks with 8.2 mm pitch - color: green

Phoenix Contact PAI-4-FIX RD Test adapter - for 4 mm test plug and terminal blocks with 8.2 mm pitch - color: red

Phoenix Contact PC WORX BASIC LIC Software package for PC-based automation solutions - PC WORX BASIC license - contains all 5 IEC languages - without MSFC compiler - max. 2048 byte input and output data - version-specific license key

Phoenix Contact PC WORX PRO LIC Software package for PC-based automation solutions - PC WORX PRO license - contains all 5 IEC languages - with MSFC compiler - max 128 kB input and output data - version-specific license key

Phoenix Contact P-FU 5X20-EX Fuse plug - connection method: Plug connection - nominal current: 6.3 A - nom. voltage: 500 V - width: 6.2 mm - fuse type: G / 5 x 20 - color: black

Phoenix Contact PLC-OSP- 24DC/ 24DC/ 10/R PLC solid-state relay with spring-cage connection, for mounting on DIN rail NS 35/7.5, input: 24 V DC, output: 3-33 V DC/10 A

Phoenix Contact PLC-RSC- 24UC/ 1/S/H PLC-INTERFACE with switch (operation by hand) for the €œManual - Zero - and Automatic€? functions - with screw connection and integrated power contact relay - for mounting on DIN rail NS 35/7,5 - 1 N/O contact - input voltage 24 V AC/DC

Phoenix Contact PLC-V8/D15S/IN V8 adapter for 8 x PLC-INTERFACE (6.2 mm) - controller: PLC system cabling of input cards - connection 1: Screw connection 1x - connection 2: D-SUB pin strip 1x 15-position - connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals) -

Phoenix Contact PLC-V8/FLK14/IN V8 adapter for 8 x PLC-INTERFACE (6.2 mm) - controller: PLC system cabling of input cards - connection 1: Screw connection 1x - connection 2: IDC/FLK pin strip 1x 14-position - connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals)

Phoenix Contact PLC-V8/FLK14/IN/M V8 adapter for 8 x PLC-INTERFACE (6.2 mm) - controller: PLC system cabling of input cards - connection 1: Screw connection 1x - connection 2: IDC/FLK pin strip 1x 14-position - connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals)

Phoenix Contact PLC-V8/FLK14/OUT V8 adapter for 8 x PLC-INTERFACE (6.2 mm) - controller: PLC system cabling of output cards - connection 1: Screw connection 1x - connection 2: IDC/FLK pin strip 1x 14-position - connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals

Phoenix Contact PLC-V8/FLK14/OUT/M V8 adapter for 8 x PLC-INTERFACE (6.2 mm) - controller: PLC system cabling of output cards - connection 1: Screw connection 1x - connection 2: IDC/FLK pin strip 1x 14-position - connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals

Phoenix Contact PLC-V8L/FLK14/OUT V8 adapter for 8 x PLC-INTERFACE (14 mm) - controller: PLC system cabling of output cards - connection 1: Screw connection 1x - connection 2: IDC/FLK pin strip 1x 14-position - connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals)

Phoenix Contact PLD E 400-ME MM Set for magnetic mounting of class 400 PLD enclosure lights

Phoenix Contact PR Latching - length: 29.8 mm - width: 4.4 mm - number of positions: 1 - color: orange

1
...
39
40
41
...
57

Категории

COO