ООО "Компания Радионикс" - Misc Products

1
...
36
37
38
...
56

Panduit CD-940H-500 Htap Crimp Dies For Ct-940Ch Remote Crimp Head.

Panduit CFP2WH-L Two Module Space.

Panduit CFP4WH Single Gang, Vertical Faceplate Accepts Four Mini-Com Modules.

Panduit CFP4WH-L Four Module Space.

Panduit CFPE2EI Mini Com 2 Position Excutive Series Faceplate

Panduit CFPE2EIY Single gang, vertical faceplate accepts two Mini-Com® Modules, Electric Ivory.

Panduit CFPH2IW Classic Series 2 Position Horizontal Faceplate

Panduit CJS688TGY Category 6, RJ45, 8-position, 8-wire universal shielded black module with integral shield.

Panduit CJS6X88TGY Accessories, Mini-Com Flat All Metal Shielded Modular Patch Panels

Panduit CLTS25F-C Corrugated loom tubing solid wall, .25" (6.4mm) x 100', polyethylene, black.

Panduit CMAA1BL-X Adapter snaps into 1" x 1" (25mm x 25mm) opening and accepts one Mini-Com® Module. For snug fit, panel thickness should be 0.06" to 0.08" (1.5mm to 2.0mm), Black.

Panduit CMBBL-C Mini-Com® 1-port blank module, reserves space for future use.

Panduit CMBBL-X Mini-Com® 1-port blank module, reserves space for future use.

Panduit CMBIG-X Mini-Com® 1-port blank module, reserves space for future use, International Gray, 10 pc.

Panduit CMBWH-X Mini-Com® 1-port blank module, reserves space for future use, White, 10 pc.

Panduit CMFEI-C Coupler Module, F Type, Electric Ivory, 100 Pack

Panduit CMFIW-C Coupler Module, F Type, Off White, 100 Pack

Panduit CMFWH-C Coupler Module, F-Type, White, 100 Pack

Panduit CMNZABL-X Mini Mode Adapter Coustomer Drawing

Panduit CPP72FMWBLY Mini-Com Modular 72 Port Faceplate Flush Mount Patch Panel

Panduit CPPL24WBLY Mini-Com 24 Port Modular Patch Panel With Lable

Panduit CSPC2LG-Q 1" bend radius corner strip pre-cut for 2" wall height.

Panduit CTH50U13-C30 Push Mount With Umbrella CLT Holder

Panduit CWPP12WBL Mini Com 12-port wall mount modular patch panel in black

Panduit CXS70-14-C One-hole, copper, single barrel, straight fixed tongue lug, #14 - #4 AWG, 1/4" (6.4mm) stud hole.

Panduit D18-187-C The vibration resistant female disconnect in metallic brass helps overcome the failures caused by high vibration. It has a tab size of 0.187 x 0.032" inches (4.8 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.58" (14.7 mm) long an

Panduit D-250A-M The vibration resistant disconnect adapter in metallic brass couples two female tabs and one male tab all sized at 0.250 x 0.032 (6.3 x 0.8 mm). The adapter is 0.82" (20.8 mm) long and 0.57" (14.5 mm) wide. It tin-plated, non-insulated, and comes in boxes

Panduit DCT-RI Replacement nylon insert.

Panduit DNG14-188FB-L The Supra-Grip™ female disconnect is made of brass and is tin-plated. It is fully insulated in blue nylon. It has a tab size of 0.187 x 0.020 (4.9 x 0.5 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.89" (22.6 mm) long and 0.29" (7.4 mm

Panduit DNG14-250FB-3K The Supra-Grip™ female disconnect is made of brass and is tin-plated. It is fully insulated in blue nylon. It has a tab size of 0.250 x 0.032 (6.3 x 0.5 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.93" (23.6 mm) long and 0.35" (8.9 mm

Panduit DNG18-250FB-L Supra-Grip Female Disconnect Nylon Fully Insulated 22 - 18 AWG .250 X .032 Tab Size

Panduit DNG18-250FL-L Disco-Lok Female Disconnect, nylon fully insulated, 22 – 18 AWG, .250 X .032 tab size.

Panduit DPF14-250FIM-2K The vibration resistant male disconnect is made of brass and is nickel-plated. It is fully insulated in blue premium nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.9" (22.9 m

Panduit F1X1WH6 Wiring Duct ONLY, Slot, Narrow Finger - White - 1"W x 1"H - 6' Length - LF PVC

Panduit FCLEANKIT Cleaning Consumables Kit

Panduit GB4B1028TPI-1 Grounding Busbar 1/4 X 4 X 24

Panduit H000X064H1C The portable printer continuous heat shrink labels in white are made of military-grade polyolefin. They measure 0.38" (9.7mm) diameter, 6' (1.8m) length, and 0.64" (16.3mm) width and have a wire range of 12–6 AWG. The fast-loading P1™ label cassette inclu

Panduit H050X025H3T Labels Heat Shrink Label Polyolefin Black 12.7x6.4mm

Panduit H050X034H1T Labels Heat Shrink Label Polyolefin White 12.7x8.6mm

Panduit H050X064H1T The thermal transfer military grade heat-shrink label in white is single sided with a 3/8" (9.525mm) diameter and made of 3:1 flattened polyolefin. It is .5" (12.7mm) wide and .64" (16.3mm) high. The heat-shrink sleeve is designed to provide a clear, reli

Panduit H100X025H1T The thermal transfer military grade heat-shrink label in white is single sided with a 1/8" (3.175mm) diameter and made of 3:1 flattened polyolefin. It is 1" (25.4mm) wide and .25" (6.4mm) high. The heat-shrink sleeve is designed to provide a clear, reliab

Panduit H100X025H2C Labels Thermal Transfer Printable Label Polyolefin Yellow 6.4x25.4mm

Panduit H100X034H1C The portable printer die-cut heat shrink labels in white are made of military-grade polyolefin. They measure 0.19" (4.6mm) diameter, 1" (25.4mm) length, and 0.34" (8.6mm) width and have a wire range of 18–12 AWG. The fast-loading P1™ label cassette includ

Panduit H100X034H1T Labels Heat Shrink Label Polyolefin White 25.4x8.6mm

Panduit H100X034H2C Labels Thermal Transfer Printable Label Polyolefin Yellow 8.6x25.4mm

Panduit H100X034H2T Labels Heat Shrink Label Polyolefin Yellow 25.4x8.6mm

Panduit H100X064H1C The portable printer die-cut heat shrink labels in white are made of military-grade polyolefin. They measure 0.38" (9.7mm) diameter, 1" (25.4mm) length, and 0.64" (16.3mm) width and have a wire range of 12–6 AWG. The fast-loading P1™ label cassette includ

Panduit H100X064H2T The thermal transfer military grade heat-shrink label in yellow is single sided with a 3/8" (9.525mm) diameter and made of 3:1 flattened polyolefin. It is 1" (25.4mm) wide and .64" (16.3mm) high. The heat-shrink sleeve is designed to provide a clear, reli

Panduit H100X084H1C Labels Heat Shrink Label Polyolefin White 21.34x25.4mm

Panduit H150X044H1T The thermal transfer military grade heat-shrink label in white is single sided with a 1/4" (6.35mm) diameter and made of 3:1 flattened polyolefin. It is 1.5" (38.1mm) wide and .44" (11.2mm) high. The heat-shrink sleeve is designed to provide a clear, reli

Panduit H200X025H1T White, 1/8" diameter polyolefin, 500/roll, 2.00" x 0.25".

Panduit H200X034H1T The thermal transfer military grade printable heat-shrink label in white is one-sided with a 3/16" (4.8 mm) diameter and made of 3:1 flattened polyolefin. It is 2.0" wide and 0.34" high (50.8 x 8.6 mm). The heat-shrink sleeve is designed to provide a clea

Panduit H200X034H3T Black, 3/16 Diameter Polyolefin, 500/Roll

Panduit H200X044H1T Labels Heat Shrink Label Polyolefin White 50.8x11.1mm

Panduit H200X165H1T The thermal transfer military grade heat-shrink label in white is one-sided with a 1.0" (25.4 mm) diameter and made of 3:1 flattened polyolefin. It is 2.0" wide and 1.65" high (50.8 x 41.9 mm). The heat-shrink sleeve is designed to provide a clear, relia

Panduit H200X165H3T The thermal transfer military grade heat-shrink label in black is one-sided with a 1.0" (25.4 mm) diameter and made of 3:1 flattened polyolefin. It is 2.0" wide and 1.65" high (50.8 x 41.9 mm). The heat-shrink sleeve is designed to provide a clear, reliab

Panduit H2X2BL6 Wiring Duct ONLY, Wide Slot, Hinged Cover - Black - 2"W x 2"H - 6' Length - LF PVC

Panduit HC2BL6 Wiring Duct Cover, Hinged - Black - 2"W 6' Length - LF PVC

Panduit HDW1/4-KT Stainless steel mounting hardware for busbar; two 1/4-20 hex bolts, two 1/4-20 hex nuts, four 1/4 flat washers and two 1/4 Belleville compression washers. Mounting hardware for rack or cabinet; two #12-24 thread-forming screws and two M6 thread-forming sc

Panduit HSG-115V-650 Heat shrink gun with stand, temperature range of 650F (343C) to 900F (482C) plus stand.

Panduit HSG-P2 Replacement switch 20 Amp.

Panduit HSTT-YK1-45 Thin wall heat shrink in 6" pieces, yellow/green stripe, multiple diameters, .06" - .50" (1.5mm - 12.7mm) diameter, cross-linked polyolefin.

Panduit LCA2-12-Q One-hole, standard barrel with window lug, #2 AWG wire, 1/2" stud hole.

Panduit LS8EQ The PanTher Hand-Held Thermal Transfer Printer with QWERTY keypad prints on continuous tapes, continuous heat-shrink tubing, die-cut heat-shrink tubing, general component labels, network component labels, self-laminating wire/cable labels, and nonlaminate

Panduit M200X042UPT White Thermal Transfer Flame Retardant Halogen Free Marker Plates

Panduit MFPD2IW Classic Series 2 Position Horizontal Faceplate

Panduit NK2HSRFIW Snap-on 2-position sloped horizontal faceplate accepts any Panduit® NetKey® Module. Compatible with Panduit® Fast-Snap™ Outlet Boxes, Surface Raceway Systems, and Pan-Pole™ Outlet Poles, Off White.

Panduit NK4FWHY Single gang, flush mount vertical faceplate with labels. Accepts up to four NetKey® Modules, White.

Panduit NKBMWH-X NetKey Blank Module

Panduit NKP5E88MBL Category 5e, 8-position, 8-wire, keystone punchdown jack module. Black.

Panduit NKP5E88MIW Category 5e, 8 Position, 8 Wire, Keystone Punchdown Jack Module.

Panduit NKP5E88MOR Category 5e, 8 Position, 8 Wire, Keystone Punchdown Jack Module.

Panduit PBSC1-X Harness spring wire breakout system, 1" (25.4mm) hole spacing.

Panduit PCL100-2 Vinyl Cloth Number, Black/Yellow

Panduit PCL100-C Vinyl Cloth Letter, Black/Yellow, 1.00 H Legend, C

Panduit PCL100-R Vinyl Cloth Letter, Black/Yellow, 1.00 H Legend, R

Panduit PESG-B-1 Symbol ISO Pictogram, 25mm Circle, White/Blue

Panduit PESS-A-ES Conductor Id Label, 12.5mm Diameter, Earth Symbol ,GMY Polyester Material

Panduit PESW-A-1Y ISO warning symbol, 0.50" (13.0mm) triangle width, caution - risk of electric shock symbol, vinyl adhesive, black/yellow, 10 markers/card, 10 cards/package.

Panduit PESW-D-9Y ISO warning symbol, 3.9" (99.1mm) triangle width, caution - general warning, risk of danger symbol, vinyl adhesive, black/yellow, 3 markers/card, 10 cards/package.

Panduit PLD-43 Electrical label in dispenser, 1.5" W x 1.0" H, 'Danger high voltage' (legend), polyester adhesive, red and black/white, 200 labels per package.

Panduit PLD-58 Electrical label in dispenser, 1.5" W x .1.00" H, 'Caution sensitive electronic devices...' (legend), polyester adhesive, black/yellow, 200 labels per package.

Panduit PLD-67 Electrical label in dispenser, 1.5" W x 1.0" H, 'Danger high voltage' (legend) with hand symbol, polyester adhesive, red/white, 200 labels per package.

Panduit PN12-14HDR-2K Ring Tongue Terminal 12-16AWG 30.48mm 13.2mm Tin Strip

Panduit PRL150YB-2 Reflective number, 1.5" legend height, '2' (legend), reflective vinyl, yellow/black, 25 markers/package, 1 pc. package quantity.

Panduit PRL250YB-2 Reflective number, 2.5" legend height, '2' (legend), reflective vinyl, yellow/black, 25 markers/package, 1 pc. package quantity.

Panduit PRL250YB-3 Reflective number, 2.5" legend height, '3' (legend), reflective vinyl, yellow/black, 25 markers/package, 1 pc. package quantity.

Panduit PROG-CCCD CAD-Connect Labeling Software with Easy-Mark Plus captures and organizes CAD files to quickly automatically create and print custom labels to suit the specific needs of the regulatory compliance, safety awareness and improved production processes. The inn

Panduit PSL-DCJB Jack module block-out device, 10 block-outs (red) and 1 removal tool (black), polycarbonate.

Panduit PSL-DCJB-GR Package Of Ten Jack Module Blackout Devices And One Removal Tool

Panduit PUM-049-2S-D30 The fir tree push mount assembly is black and requires a panel hole diameter of 0.18 to 0.19" (4.6 to 4.9 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 5

Panduit PUM-049-C30 The fir tree push mount is black and requires a panel hole diameter of 0.18 to 0.19" (4.6 to 4.9 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Panduit PUM-049-M30 The fir tree push mount is black and requires a panel hole diameter of 0.18 to 0.19" (4.6 to 4.9 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 1000.

Panduit PUM-071-2S-D30 The fir tree push mount assembly is black and requires a panel hole diameter of 0.25 to 0.28" (6.3 to 7.1 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 5

Panduit PUM-071-C30 The fir tree push mount is black and requires a panel hole diameter of 0.25 to 0.28" (6.3 to 7.1 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Panduit PUM-071-M30 The fir tree push mount is black and requires a panel hole diameter of 0.25 to 0.28" (6.3 to 7.1 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 1000.

1
...
36
37
38
...
56

COO