ООО "Компания Радионикс" - Инструменты для сборки

1
2
3
4
5
...
9

Molex / Waldom 11-40-4085 Tools and Accessories - Term Stop and Amp - Scrap Shield.

Molex / Waldom 11-40-4599 Cut-Off Plunger 8358-10.

Molex / Waldom 11-40-5255 Feed Arm 63316A149.

Molex / Waldom 62100-1000 Manual Extraction Tool Handtool

Molex / Waldom 63443-3410 Cut Off Punch

Molex / Waldom 63813-0800 Manual Extraction Tool Handtool

Molex / Waldom 63813-2500 Extraction Tool For Removal Of 98910 Series

Molex / Waldom 63819-6400 Hand Crimp Tool For 0.250 MP-Lock Crimp Terminals

Neutrik BTXX XLR Cable Connector Accessories - Speed boot assembly tool to press the XX boot onto shell.

Omron Electronics XY2B-7006 Termination Tool Ideal For Use In The Laboratory Or For Maintenance

Omron Electronics XY2B-7007 Manual Crimping Tool

Omron Electronics XY2E-0001 Contact Removal Tool Used To Remove Contacts

Omron Electronics XY2E-0003 Contact Removal Tool

Omron Automation DWTA02 Crimping Tool For Flat Connector

Paladin Tools 1461 Four-Indent D-Sub Crimper

Panduit CBOT24K Cable bundle organizing tool, tool kit contains jacket cover with hook and loop fastener, green insert and yellow insert.Green Insert recommended for cable outer diameter range: 0.18" (4.6mm) – 0.25" (6.3mm).Yellow Insert recommended for cable outer diame

Panduit CD-720-2 Crimp Die for CT-720, #1 – 3/0 AWG copper connector.

Panduit CD-720PV8-2 Compression Connector Tool

Panduit CT-1000 Controlled cycle crimp tool with trapezoid profile for #20 – 14 AWG (0.50 – 2.5mm²) insulated continuously molded ferrules on strips. Also cuts and strips wire.

Panduit CT-1004 The controlled cycle crimp tool has a trapezoidal profile and is designed for strength and durability. It is intended for American Wire Gauge (AWG) #8 to 6 (0.10 to 16.0 mm²) insulated and non-insulated single wire ferrules and American Wire Gauge (AWG) #

Panduit CT-1005 Controlled cycle crimp tool with trapezoid profile for Panduit #4 – 2 AWG (26.0 – 35.0mm²) insulated and non-insulated ferrules.

Panduit CT-1104 Controlled Cycle Crimping Tools, Ferrule End Sleeve

Panduit CT-1123 The controlled cycle crimp tool has a square profile and is designed for strength and durability. It is intended for American Wire Gauge (AWG) #26 to 8 (0.14 to 10.0 mm²) insulated and non-insulated single wire ferrules and American Wire Gauge (AWG) #22 t

Panduit CT-1525 Crimps Panduit #26 – 22 AWG insulated terminals and splices, #22 – 10 AWG fully insulated disconnects and insulated parallel splices. Crimps Panduit #22 – 14 AWG barrel insulated disconnects.

Panduit CT-1550 Crimp Tool - Hand - Panduit PAN-TERM 22-10AWG Insulated & Non-Insulated Terminals & Splices.

Panduit CT-1551 Crimps most Panduit #22 – 10 AWG nylon and vinyl insulated terminals, splices, and disconnects. The tool has the yellow pocket closest to the pivot which provides a reduced crimp effort for those who make yellow terminations.

Panduit CT-1570 Crimps most Panduit #22 – 10 AWG and 0.5 – 6.0mm² non-insulated terminals and disconnects. Crimps Panduit #22 – 10 AWG and 0.5 – 6.0mm² non-insulated splices, #14 – #10 AWG copper code conductor lugs, and 4mm² – 6mm² copper metric lugs.

Panduit CT-1701 Crimps Panduit #10 – 2 AWG non-insulated large gauge ring terminals (P series), #12 – 4 AWG non-insulated heavy duty ring terminals (P series), #14 – 10 AWG copper code conductor lugs, and 4mm² – 6mm² copper metric lugs. Includes 5-position, rotating die.

Panduit CT-2525CH Crimp Head for CT-2500 Crimp Tool

Panduit CT-2570CH Crimp Head for CT-2500 Crimp Tool

Panduit CT-300-1 Terminals, Ferrules, And Crimping Tools

Panduit CT-550CH Crimping head for most #22 – 10 insulated terminals and splices.

Panduit CT-570CH Crimping Head Product Information Charts

Panduit CT-720 Manual crimping tool for UL Listed or Recognized and CSA Certified terminations of Panduit copper compression lugs and splices for #8 AWG – 500 kcmil copper code conductor and aluminum compression lugs and splices for #6 AWG – 350 kcmil copper and aluminu

Panduit CT-980LPCH Crimp Head, Remote Hydraulic, Dieless, 4.7 Ton, Use With CT-8250HP

Panduit DCT Hand-held duct cutting tool.

Panduit DCT-BLD Replacement blade kit with blade and nylon insert.

Panduit DNT-100 Hand-held sidewall notching tool.

Panduit FHSCT Field Polish Termination Kits And Components, Heat Shrink Curing Tool

Panduit GS4H The cable tie tool in red (trigger handle and selector knob) and gray (metal housing) installs standard, heavy-standard, light-heavy, and heavy cross-section cable ties. It features adjustable tension and is a qualified product listed per Mil. Std. MS9038

Panduit GTH The cable tie tool in red (trigger handle, cushion sleeve, and selector knob) and gray (impact-resistant resin housing) installs standard, heavy-standard, light-heavy, and heavy cross-section cable ties. It features adjustable tension and ergonomic design

Panduit HBN3-T Harness board nail, standard, 3.0" (76.2mm) length.

Panduit MPT5-8AS Crimp tool for TX6™ PLUS and Pan-Plug™ Modular Plugs.

Panduit RT2HTN Narrow Nose Installation Tool For Use With Extra-Heavy Extra-Heavy 15

Panduit ST2MT Installation tool for use with the following stainless steel cross section ties:Type MLT: Standard, light-heavy, heavy and extra-heavyType MLTFC: Standard, heavy and extra-heavyType MLTC and MLT-LPAL: HeavyType MLTD: Heavy and extra-heavyUsed with custom

Panduit ST3EH The cable tie tool in blue (handles) installs light-heavy, heavy, and extra-heavy cross-section cable ties. It features durable all-steel construction with comfortable rubber handles. Weighing 9 oz. (256g), it is sold individually.

Panduit TNR Hand-held nylon rivet installation tool.

Philmore Mfg. 61-390 Pin Extraction Tools

Philmore Mfg. 63-508 Compression Connector Tool

Philmore Mfg. 702J Phone Plugs And Jacks

Philmore Mfg. WS20 Telephone Plugs And Crimping Tools

Philmore Mfg. WS20B Telephone Plugs And Crimping Tools

Philmore Mfg. WS210 Telephone Plugs And Crimping Tools

Philmore Mfg. WS23 Telephone Plugs And Crimping Tools

Philmore Mfg. WS23B Telephone Plugs And Crimping Tools

Philmore Mfg. WS24 Telephone Plugs And Crimping Tools

Philmore Mfg. WS24B Crimp Modular Plugs Tool

Philmore Mfg. WS26 D-Subminiature Crimping Tool

Philmore Mfg. WS608

Phoenix Contact CUTFOX 50 STEEL Ring cable cutter - with ratchet function - for copper and aluminum up to 50 mm Ã˜ - for steel-armored CU/AL cables - for stranded steel cables up to 12 mm in diameter

Phoenix Contact SF-BIT-PZ 1-50 Screw bit - PZ crosshead - E6.3-1/4" drive - size: PZ 1 x 50 mm - hardened - suitable for holder according to DIN 3126-F6.3/ISO 1173

Phoenix Contact SF-BIT-PZ 2-50 Screw bit - PZ crosshead - E6.3-1/4" drive - size: PZ 2 x 50 mm - hardened - suitable for holder according to DIN 3126-F6.3/ISO 1173

Phoenix Contact SF-BIT-SL 0 6X3 5-50 Screw bit - bladed - E6.3-1/4" drive - size: 0.6 x 3.5 x 50 mm - hardened - suitable for holder according to DIN 3126-F6.3/ISO 1173

Phoenix Contact SF-BIT-SL 0 6X3 5-70 Screw bit - slot - E6.3-1/4" drive - Size: 0.6 x 3.5 x 70 mm - hardened - suitable for holders as per DIN 3126-F 6.3 / ISO 1173

Phoenix Contact SF-BIT-SL 0 8X4 0-50 Screw bit - bladed - E6.3-1/4" drive - size: 0.8 x 4.0 x 50 mm - hardened - suitable for holder according to DIN 3126-F6.3/ISO 1173

Phoenix Contact SF-BIT-SL 0 8X4 0-70 Screw bit - bladed - E6.3-1/4" drive - size: 0.8 x 4.0 x 70 mm - hardened - suitable for holder according to DIN 3126-F6.3/ISO 1173

Phoenix Contact SF-BIT-TX 10-50 Screw bit - Torx® - E6.3-1/4" drive - size: TX 10 x 50 mm - hardened - suitable for holder according to DIN 3126-F6.3/ISO 1173

Phoenix Contact SF-SL 0 6X3 5-100 S-VDE Actuation tool - for ST terminal blocks - VDE insulated - with slimmer insulation integrated in the blade - also suitable for use as a bladed screwdriver - size: 0.6 x 3.5 x 100 mm - 2-component grip - with non-slip grip

Phoenix Contact UNIFOX-CT 4 8P Cable binder pliers - for plastic cable binders with a width of 2.2 - 4.8 mm - for a material thickness of up to 1.6 mm

Phoenix Contact UNIFOX-CT M 7 9 Cable binder pliers - for steel cable binders with a width of up to 7.9 mm - for a material thickness of up to 0.3 mm

Quest Technology DHA-3000 Insertion/Extraction Tool For 75 DHM BNC Connectors Adapters

Quest Technology TCS-5040 F And Large O.D. Crimp Tools

Quest Technology TEL-6001 Modular Crimp Tools

Quest Technology TEL-6050 F And Large O.D. Crimp Tools

Quest Technology TEL-6070 F And Large O.D. Crimp Tools

Quest Technology TEL-6120 F And Large O.D. Crimp Tools

Quest Technology TFC-4010 Aluminum Frame Crimp Tools

Quest Technology TFC-4040 Ratchet RF Crimp Tools

Quest Technology TMI-1031 F And Large O.D. Crimp Tools

Quest Technology TMI-1040 F And Large O.D. Crimp Tools

Quest Technology TRF-3015 Ratchet RF Crimp Tools

RAFI 1.90.900.001/0000 Lamp extractor for lamp diameter 4 mm

RAFI 1.90.900.002/0000 Lamp extractor for lamp diameter 4 mm

RAFI 1.90.900.003/0000 Lamp extractor for lamp diameter 5 mm

RAFI 1.90.900.004/0000 Lamp extractor for lamp diameter 5-6 mm

RAFI 1.90.900.007/0000 Lamp extractor for lamp diameter 11 mm

RAFI 5.05.800.062/0000 Fixing spanner for ring nut

RAFI 5.58.002.019/0105 Fixing spanner M 15, M 16

nVent SCHROFF 21100667

TE Connectivity / AMP Brand 1055258-1 TORQUE WRENCH

TE Connectivity / AMP Brand 1055419-1 Torque - Wrench - 8in-lb - 7.9mm Drive - 177mm Length.

TE Connectivity / AMP Brand 1055443-1 Tool For RF Connectors

TE Connectivity / AMP Brand 1055447-1 OSM PLUG DIELECTRIC INSERT TL

TE Connectivity / AMP Brand 1055451-1 Locator Tool For Solder SMA Kit.

TE Connectivity / AMP Brand 1055461-1 Tools and Accessories, Locator For Plug Type B

TE Connectivity / AMP Brand 1055546-1 TORQUE WRENCH

1
2
3
4
5
...
9

COO

CA
CH
CN
CZ
DE
GB
IN
JP
KR
LI
MX
NL
SE
TN
TW
US