ООО "Компания Радионикс" - Ограничители перенапряжения 1

1
2
3
4
5
...
9

Phoenix Contact 2880561 Surge protection for antenna distributors in satellite systems. IN and OUT via F connectors - 5 channels for signals from SAT systems and terrestrial antennas - ground connection on the outside of the housing.

Phoenix Contact 2880642 Fine surge protection in a 9-pos. D-SUB plug for PROFIBUS-DP applications with a transmission speed of up to 12 Mbps.

Phoenix Contact 2880671 Surge protection in the IP67 screw-on module for measuring sensors in intrinsically safe circuits - direct mounting with M20 x 1.5 outer thread - cable gland for the signal cable - two-stage protective circuit. HART-compatible.

Phoenix Contact 2881007 Surge protection in accordance with Class EA (CAT6A) - for Gigabit Ethernet (up to 10 Gbps) - token ring - FDDI/CDDI - ISDN - and DS1. Suitable for Power over Ethernet (PoE+) €œMode A€? and €œMode B€?. RJ45 attachment plug with separate grounding cable an

Phoenix Contact 2881036 Surge Suppressors 50Hz/60Hz 230VAC/400VAC/240VAC/415VAC DIN Rail Plug-In

Phoenix Contact 2882200 Attachment plug with surge protection for mains sockets - optical power and error display. For country-specific use in: D - A - I - NL - S - E - N - FIN

Phoenix Contact 2882585 Surge protection in the IP67 screw-on module for measuring sensors in intrinsically safe circuits - direct mounting with 3/4" NPT outer thread - cable gland for the signal cable - two-stage protective circuit. HART-compatible.

Phoenix Contact 2882828 Surge protective device - consisting of plug and base element - for protecting a double wire from analog and digital telecommunications interfaces (VDSL up to 50 Mbps - on short paths ( P

Phoenix Contact 2882925 Attachment plug with surge protection for analog and digital telecommunications interfaces (VDSL up to 50 Mbps). Connection: RJ45 (RJ12/RJ11) and screw terminal block (COMBICON). Alternatively - can be snapped onto a DIN rail.

Phoenix Contact 2905219 EMC filter surge protection device

Phoenix Contact 2905235 Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 product range. 230 V nominal voltage.

Phoenix Contact 2905236 Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 3S product range. 230 V nominal voltage.

Phoenix Contact 2905341 Plug-in surge arrester - in accordance with Type 2/Class II - for 1-phase power supply networks with separate N and PE (3-conductor system: L1 - N - PE).

Phoenix Contact 2905342 Plug-in surge arrester - in accordance with Type 2/Class II - for 2-phase power supply networks with combined PE and N installed in one conductor (3-conductor system: L1 - L2 - PEN).

Phoenix Contact 2905347 Replacement plug for surge arresters from the VALVETRAB SEC product range for the N-PE path.

Phoenix Contact 2905348 Plug-in surge arrester - in accordance with Type 2/Class II - for 1-phase power supply networks with separate N and PE (3-conductor system: L1 - N - PE) - with remote indication contact.

Phoenix Contact 2905355 Replacement plug for surge arresters from the VALVETRAB SEC product range for L-N and L-PEN paths.

Phoenix Contact 2905356 Replacement plug for surge arresters from the VALVETRAB SEC product range for the N-PE path.

Phoenix Contact 2905364 Base element for the PLUGTRAB PT-IQ-PTB... supply and remote signaling module

Phoenix Contact 2905416 Plug-in lightning current arrester - in accordance with Type 1/Class I - for 2-phase power supply networks with combined PE and N installed in one conductor (L1 - L2 - PEN).

Phoenix Contact 2905418 Plug-in lightning current arrester - in accordance with Type 1/Class I - for 2-phase power supply networks - with separate N and PE (L1 - L2 - PE - N).

Phoenix Contact 2905466 Plug-in lightning and surge arrester combination - in accordance with Type 1+2/Class I+II - for 1-phase power supply networks - with separate N and PE (L1 - PE - N).

Phoenix Contact 2905473 Replacement plug for lightning current arresters from the FLASHTRAB SEC product range - for the N-PE path.

Phoenix Contact 2906279 Surge arresters consisting of base element and protective connector with high-capacity varistor - for mounting on NS 35/7.5 - 1-channel

Phoenix Contact 2906280 Surge arresters consisting of base element and protective connector with high-capacity varistor - for mounting on NS 35/7.5 - 1-channel

Phoenix Contact 2906318 Assembly with base element for type 2 arresters of the VALVETRAB MS product range and TE-AR disconnect terminal block - with remote indication contact and field wire isolation. Version for 1-mode protection of field signals in railroad applications.

Phoenix Contact 2906320 Assembly with base element for type 2 arresters of the VALVETRAB MS product range and TE-AR disconnect terminal block - with remote indication contact and field wire isolation. Version for 1-mode protection of field signals in railroad applications.

Phoenix Contact 2906323 Surge Suppressors 80A 48VAC DIN Rail

Phoenix Contact 2906713 Surge protection with integrated status indicator and knife disconnection for a 2-wire floating signal circuit - e. g. 0(4)...20 mA current loop - HART-compatible.

Phoenix Contact 2906729 Surge protection with integrated status indicator and disconnect knife for two signal wires with common reference potential - e.g. - Digital IN/OUT.

Phoenix Contact 2906798 Surge protection for a 2-wire floating signal circuit - e.g. - 0(4) ... 20 mA current loop - HART-compatible.

Phoenix Contact 2906805 Surge protection for two signal wires with common reference potential - e.g. - Digital IN/OUT.

Phoenix Contact 2906816 Surge protection - consisting of protective plug and base element - with integrated status indicator for two signal wires with common reference potential - e.g. - Digital IN/OUT.

Phoenix Contact 2906817 Surge protection - consisting of protective plug and base element - with integrated status indicator for a 2-wire floating signal circuit with high nominal current.

Phoenix Contact 2906820 Surge protection with integrated status indicator and disconnect knife for a 2-wire floating Ex i signal circuit - e.g. - 0(4) ... 20 mA current loop - HART-compatible.

Phoenix Contact 2906823 Surge protection - consisting of protective plug and base element - with integrated status indicator and knife disconnection for a 3-wire Ex i signal circuit with common reference potential. For HF applications. Indirect grounding via gas-filled surge arr

Phoenix Contact 2906831 Fine surge protection with integrated status indicator for a signal wire with grounded reference potential.

Phoenix Contact 2906832 Fine surge protection with integrated status indicator for a signal wire with grounded reference potential.

Phoenix Contact 2906834 Fine surge protection with integrated status indicator for a 2-wire floating signal circuit.

Phoenix Contact 2906838 Medium surge protection with integrated status indicator for a signal wire with grounded reference potential.

Phoenix Contact 2906848 Fine surge protection with integrated status indicator for a signal wire with grounded reference potential.

Phoenix Contact 2907326 Surge protection for two signal wires with common reference potential - e.g. - Digital IN/OUT.

Phoenix Contact 2908201 Surge protection - consisting of protective plug and base element - with integrated status indicator for two signal wires with common reference potential - e.g. - Digital IN/OUT.

Phoenix Contact 2910355 Surge protective device - single channel with remote indicator contact for 120 V AC.

Phoenix Contact 2910361 Surge protective device - single channel with remote indicator contact for 240 V AC.

Phoenix Contact 2910374 Surge protective device - four channel with remote indicator contact for 277/480 V AC - 4-wire plus ground.

Phoenix Contact 2920078 Surge protection plug with integrated diagnostic and status indicator on the module and remote indication contact for a 2-wire floating signal circuit.

Phoenix Contact 2920120 Surge protection plug with integrated diagnostic and status indicator on the module and remote indication contact for two signal wires with common reference potential. Nominal voltage: 24 V DC

Phoenix Contact 2920230 Surge arrester for 4-conductor power supply systems (L1 - L2 - L3 - PEN) - consisting of a base element and protective connectors - for mounting on NS 35.

Phoenix Contact 2920528 Base element for type 2 arresters of the VALVETRAB MS product range. Version for 1-phase power supply with separate installation of N and PE conductors.

Phoenix Contact 2920667 Device protection - according to type 3/class III - with network interference suppression filter to prevent high-frequency interference voltages - for 1-phase power supply networks with separate N and PE (3-conductor system: L1 - N - PE) - with remote ind

Phoenix Contact 5603514 Surge Suppressors 120VAC Wall Mount Plug-In

Phoenix Contact 5604374 Surge Protective Device

Phoenix Contact CB 1/10-1/10 UT-BE Base element with screw connection technology for CB... device circuit breakers

Phoenix Contact CB 1/6-2/4 PT-BE Base element with push-in connection technology for CB ... device circuit breakers

Phoenix Contact CN-LAMBDA/4-0.47-BB Attachment plug with Lambda/4 technology as surge protection for coaxial signal interfaces. Connection: N connectors socket-socket

Phoenix Contact CN-LAMBDA/4-0.47-SB Attachment plug with Lambda/4 technology as surge protection for coaxial signal interfaces. Connection: N connectors plug/socket

Phoenix Contact CN-LAMBDA/4-2.25-BB Attachment plug with Lambda/4 technology as surge protection for coaxial signal interfaces. Connection: N connectors socket-socket

Phoenix Contact CN-LAMBDA/4-2.2-BB Attachment plug with Lambda/4 technology as surge protection for coaxial signal interfaces. Connection: N connectors socket-socket

Phoenix Contact CN-LAMBDA/4-2.2-SB Attachment plug with Lambda/4 technology as surge protection for coaxial signal interfaces. Connection: N connectors plug/socket

Phoenix Contact CN-UB-280DC-3-BB Attachment plug with replaceable surge protection for coaxial signal interfaces. Connection: N connector socket/socket

Phoenix Contact CN-UB-280DC-3-SB Attachment plug with replaceable surge protection for coaxial signal interfaces. Connection: N connector plug/socket

Phoenix Contact CN-UB-70DC-6-BB Attachment plug with surge protection for coaxial signal interfaces. Connection: N connector - female/female

Phoenix Contact C-SAT-BOX Surge protection for antenna distributors in satellite systems. IN and OUT via F connectors - 5 channels for signals from SAT systems and terrestrial antennas - ground connection on the outside of the housing.

Phoenix Contact CT 10-18FS+F/PE-24 LSA-PLUS plug (COMTRAB CT 10) with coarse/fine surge protection for 18 signal lines - GND and GND - PE coarse protection. Nominal voltage: 24 V DC. Version: 10 double wires.

Phoenix Contact CTM 1X2- 12DC LSA-PLUS plug with protection for conductor pairs in floating signal circuits. Nominal voltage: 12 V DC

Phoenix Contact CTM 2X1-110AC LSA-PLUS plug (COMTRAB CTM) with protective circuit for 2-conductor signal circuits grounded on one side. Nominal voltage: 110 V AC

Phoenix Contact CTM 2X1- 12DC LSA-PLUS plug (COMTRAB CTM) with protective circuit for 2-conductor signal circuits grounded on one side. Nominal voltage: 12 V DC

Phoenix Contact CTM 2X1- 24DC LSA-PLUS plug (COMTRAB CTM) with protective circuit for 2-conductor signal circuits grounded on one side. Nominal voltage: 24 V DC

Phoenix Contact CTM 2X1- 60DC LSA-PLUS plug with protective circuit for 2-conductor signal circuits grounded on one side. Nominal voltage: 60 V DC

Phoenix Contact C-UFB- 5DC/E Attachment plug with surge voltage coarse and fine protection - for coaxial signal interfaces with floating shield - signal voltage 5 V. Connection: BNC socket/plug

Phoenix Contact C-UFB- 5DC/E 75 Attachment plug with surge voltage coarse and fine protection - for coaxial signal interfaces with floating shield - signal voltage 5 V. Connection: BNC socket/plug

Phoenix Contact D-LAN-19-12 Surge Suppressors 1.5A

Phoenix Contact D-LAN-19-8 Surge Suppressors 2.5kA

Phoenix Contact D-LAN-CAT.5-FP Fine surge protection for data networks up to 1 Gbps. For use in Ethernet - Power over Ethernet (PoE - mode A and mode B) - token ring - ISDN - and DS1. RJ45 attachment plug with separate grounding cable and snap-on foot for NS 35 DIN rails.

Phoenix Contact DT-LAN-CAT.6+ Surge protection in accordance with Class EA (CAT6A) - for Gigabit Ethernet (up to 10 Gbps) - token ring - FDDI/CDDI - ISDN - and DS1. Suitable for Power over Ethernet (PoE+) €œMode A€? and €œMode B€?. RJ45 attachment plug with separate grounding cable an

Phoenix Contact DT-TELE-RJ45 Attachment plug with surge protection for analog and digital telecommunications interfaces (VDSL up to 50 Mbps). Connection: RJ45 (RJ12/RJ11) and screw terminal block (COMBICON). Alternatively - can be snapped onto a DIN rail.

Phoenix Contact DT-UFB-V24/S-9-SB Attachment plug with surge protection for V.24 interface. Connection: D-SUB-9 plug/socket - installation in lines

Phoenix Contact FLT 100 N/PE-1.5 Lightning current arrester with encapsulated N-PE spark gap - single-channel. Housing width: 35 mm (2 pitches)

Phoenix Contact FLT 35-260 Type 1 / Class I / B arrester (lightning current arrester) with encapsulated arc chopping spark gap - 1-channel. Housing width: 17.5 mm (1 Div.)

Phoenix Contact FLT-CP-3S-350 Pluggable lightning current and surge arrester combination, in acc. with typ 1+2 / Class I+II / B+C arresters. Arresters coordinated following the AEC principle, for 3-phase power supply networks with separately installed PE and N (L1, L2, L3, PE, N).

Phoenix Contact FLT-CP-PLUS-350-ST Type 1 / Class I / B arrester (lightning arrester) replacement plug for paths L-N and L-PEN, can be combined with FLASHTRAB compact series of products.

Phoenix Contact FLT-SEC-P-T1-2C-350/25-FM Plug-in lightning current arrester - in accordance with Type 1/Class I - for 2-phase power supply networks with combined PE and N installed in one conductor (L1 - L2 - PEN).

Phoenix Contact FLT-SEC-P-T1-2S-350/25-FM Plug-in lightning current arrester - in accordance with Type 1/Class I - for 2-phase power supply networks - with separate N and PE (L1 - L2 - PE - N).

Phoenix Contact FLT-SEC-T1+T2-1S-350/25-FM Plug-in lightning and surge arrester combination - in accordance with Type 1+2/Class I+II - for 1-phase power supply networks - with separate N and PE (L1 - PE - N).

Phoenix Contact F-MS 12/FM Surge arrester type 2 - consisting of base element with remote indicator contact and protective plug with N-PE total current spark gap for mounting on NS 35/7.5 - housing width: 17.5 mm (1 Div.)

Phoenix Contact F-MS 12 ST Surge protection plug type 2 - with N-PE total current spark gap for base element.

Phoenix Contact LIT 1X2-24 Surge protection in the one-piece 6.2 mm DIN rail module for one floating signal circuit in 2-wire technology. Tested according to the protection types in Ex areas Ex ia IIC/Ex iaD. HART-compatible.

Phoenix Contact LIT 4-24 Surge protection in one-piece 6.2 mm wide DIN rail module for four floating signal wires.

Phoenix Contact LIT 4X1-24 Surge protection in one-piece 6.2 mm wide DIN rail module for four conductors with common reference potential.

Phoenix Contact MNT-1 D Attachment plug with surge protection for mains sockets - optical power and error display. For country-specific use in: D - A - I - NL - S - E - N - FIN

Phoenix Contact MT-RS485-TTL Rail-mountable module with surge voltage coarse and fine protection for RS-485 interface - with TTL level - for mounting on NS 35/7.5 - housing width: 50 mm

Phoenix Contact PLT-SEC-T3-3S-230-P Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 3S product range. 230 V nominal voltage.

Phoenix Contact PT 1X2-12DC-ST PT protective connector with protective circuit for a 2-wire floating signal circuit. HART-compatible.

Phoenix Contact PT 1X2-24AC-ST PT protective connector with protective circuit for a 2-wire floating signal circuit. HART-compatible.

Phoenix Contact PT 1X2-24DC/FM-ST Surge protection plug with integrated diagnostic and status indicator on the module and remote indication contact for a 2-wire floating signal circuit.

1
2
3
4
5
...
9

COO

CA
CN
CZ
DE
FR
GR
ID
IN
JP
MX
PL
RO
SI
TW
US